1-19
76
To stop during recording
Open the remote’s cover and press
x
REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
Notes
• The disc may not be recorded as programmed if the
tape’s time code is not sequential or there are blanks
between the recordings on the tape. In this case, see
“Recording From Connected Equipment Without a
Timer” (page 51).
• The start and end points of a program may be different
from what you have set if the source DV format tape is
in any of the following conditions:
– Recording mode was changed during the recording.
– There is a blank space in the recorded portion of the
tape.
• If you set the beginning of the tape as the IN point and
the end point as the OUT point, the IN and OUT points
may change slightly during dubbing.
• You cannot set a scene to be shorter than one second.
Advanced Program Edit
By using an additional DVD-RW (VR mode) disc,
you can quickly edit contents of a DV format tape,
and dub the edited contents to another disc.
To use this function, you will do the following:
m
x
m
Taking advantage of the disc’s quick accessibility,
select the scenes you want from the recorded
DVD-RW (VR mode). You do not have to fast
forward or rewind the tape as explained in
“Program Edit” (page 74). You can also reset,
erase, or change the order of the scenes.
m
After you have selected the scenes, you can dub
the selected scenes to another disc of your choice.
Connect your digital video camera and
prepare for recording
Record the entire contents of the DV
tape to a DVD-RW (VR mode)
Select and edit the scenes you want to dub
Dub the scenes to another disc
-RWVR
1
Copy all and
edit the
contents.
2
Dub the
edited
contents.
DVD-RW
(VR mode)
77
D
V
Du
bbi
ng (R
D
R
-G
X7
00 on
ly
)
◆
How chapters are created
The dubbed contents on the disc become one title,
and the title is divided into chapters. For a DVD-
RW (VR mode), every shooting on the tape and
each selected scene becomes a chapter on the disc
(Auto Scene Chaptering function). You can also
choose to manually divide the title.
1
Follow steps 1 to 6 of
“
Preparing for
recording using the DV IN jack
”
(page 70),
and press SYSTEM MENU.
Insert a DVD-RW (VR mode) into the
recorder.
Make sure that the disc has enough free space
to record the contents of your tape.
2
Select
“
DV EDIT,
”
and press ENTER.
The DV Edit menu appears.
3
Select
“
Advanced Program Edit,
”
and
press ENTER.
The display asks if you want to start dubbing.
To change the dubbing mode, select “Dub
Mode” and press
M
/
m
.
4
Select
“
Start,
”
and press ENTER.
The recorder starts dubbing the tape contents.
After dubbing finished, do not operate the
recorder until the display for entering the title
name appears. To enter a new name, select
“Enter,” and follow the explanations on page
40.
5
Select
“
OK
”
to use the default title name,
and press ENTER.
The display asks if you want to create scenes
(chapters) within the generated program
automatically or manually. To use the Auto
Scene Chaptering function, select “Auto.”
6
Select
“
Manual,
”
and press ENTER.
The display for setting the IN point (start of
the scene) appears, and the scene starts to play
in the background. Follow steps 5 to 8 of
“Program Edit” (page 74) to create and edit
scenes in the program.
7
When you finish editing the Scene List,
select
“
OK,
”
and press ENTER.
The edited program is saved in the DV Edit
List.
8
Select the program from the DV Edit List,
and start dubbing the program contents to
another disc.
Follow the instructions of “Creating a Copy of
the Edited Contents (Copy Dubbing)”
(page 78).
1
2
3
4
5
6
7
8
9
0
<
/
M
/
m
/
,
,
ENTER
SYSTEM
MENU
x
REC
STOP
DV Dubbing
Change the dubbing mode if necessary.
Select "Start" to start dubbing.
Cancel
Start
2.6GB
SP
Dub Mode
Edit
Select the method for dividing scenes.
Manual
Auto
Cancel
DV 11.10.2003 13:30 - 12.11.2003 Chapter 2
Select scene (Set IN point)
OUT - : - - : - -
IN 0:00:30
,
continued
78
Notes
• The disc may not be recorded as programmed if the
tape’s time code is not sequential or there are blanks
between the recordings on the tape. In this case, follow
the instructions of “Recording From Connected
Equipment Without a Timer” (page 51).
• You cannot set a scene to be shorter than one second.
• The start and end points of a program may be different
from what you have set if the source DV format tape is
in any of the following conditions:
– Recording mode was changed during the recording.
– There is a blank space in the recorded portion.
• A program can contain up to 50 scenes (chapters). If the
recorder divides a program and the number of scenes
reaches 49, the rest of the program becomes one scene
(chapter).
Creating a Copy of the
Edited Contents
(Copy Dubbing)
You can make duplicate copies of the programs in
the DV Edit List to a disc of your choice.
To use this function, you will do the following:
Be sure to insert the original DV format tape that
corresponds to the program in the DV Edit List.
m
m
The recorder will fast forward and rewind the tape
automatically and record the scenes to a disc of
your choice.
◆
How chapters are created
The dubbed contents on the disc become one title,
and the title is divided into chapters. For a DVD-
RW (VR mode), every shooting on the tape and
each selected scene becomes a chapter on the disc
(Auto Scene Chaptering function). For other discs,
the recorder divides the title in either 6 or 15-
minute intervals, according to the setting in “Auto
Chapter” in Features Setup.
Connect your digital video camera and
prepare for recording
Select a program from the DV Edit List
Dub the selected scenes to a disc
-RW
Video
+
RW
-
R
-RWVR
+
R
1
2
3
4
5
6
7
8
9
0
<
/
M
/
m
/
,
,
ENTER
SYSTEM
MENU
x
REC
STOP
79
D
V
Du
bbi
ng (R
D
R
-G
X7
00 on
ly
)
1
Follow steps 1 to 6 of
“
Preparing for
recording using the DV IN jack
”
(page 70),
and press SYSTEM MENU.
Be sure to insert the original DV format tape
that corresponds to the program in the DV
Edit List.
2
Select
“
DV EDIT,
”
and press ENTER.
The DV Edit menu appears.
3
Press
M
/
m
to select
“
DV Edit List,
”
and
press ENTER.
The DV Edit List menu appears.
4
Select the program you want to record on a
disc, and press ENTER.
The sub-menu appears.
5
Select
“
DV Dubbing,
”
and press ENTER.
The display for entering a title name appears.
To enter a new name, select “Enter,” and
follow the explanations on page 40.
6
Select
“
OK
”
to use the default name, and
press ENTER.
The display asks whether to start dubbing. To
change the dubbing mode, select “Dub Mode”
and press
M
/
m
.
7
Select
“
Start,
”
and press ENTER.
The recorder starts recording the tape contents
as programmed.
• If the recording does not fit due to the
dubbing mode you selected, the display asks
if you want to continue. To change the
dubbing mode, select “Reset.” To have the
recorder adjust the dubbing mode, select
“Auto Dub Mode.”
• If there is not enough disc space even after
changing the dubbing mode, the display
asks if you want to record halfway. To
continue, select “OK.”
To stop during recording
Open the remote’s cover and press
x
REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
Re-editing the “program” in the DV
Edit List
You can make changes to the programs in the DV
Edit List if they were created by One Touch
Dubbing or Advanced Program Edit on a DVD-
RW (VR mode). You can reset, erase, or change
the order of the scenes.
To use this function, you will do the following:
Be sure to use the original DV format tape and the
DVD-RW (VR mode) that corresponds to the
program in the DV Edit List.
m
m
Title Name
Enter the title name.
DV 11.10.2003 13:30 - 12.11.2003 16:46
OK
Enter
Cancel
DV Dubbing
2.6GB
Change the dubbing mode if necessary.
Select "Start" to start dubbing.
SP 0.8GB
Dub Mode
Start
Data capacity required
for the dubbing.
Connect your digital video camera and
prepare for editing
Select a program from the DV Edit List
Edit the program in the DV Edit List
-RWVR
,
continued
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
