Sony PXW-Z190T, Руководство по эксплуатации

Страница: 50 / 170

50
You can check the remaining capacity on an SD
card on the Media Status screen
(page 17) .
Note
• A mark is displayed if the SD card is protected.
To use media formatted on the camcorder in the
slot of another device
First, make a backup of the card, then reformat the card
in the device to be used.
Configuring before shooting
1
Set Proxy Rec >Setting in the Recording
menu to On.
2
Insert the SD card media into the
UTILITY SD/MS slot
(page 9) with the
label facing right.
Note
• Proxy Rec cannot be set to On at the same time as S&Q
Motion, Interval Rec, Picture Cache Rec, 2-slot Simul
Rec, or 4K & HD (Sub) Rec (when MPEG HD upgrade
license (option) is installed). When Proxy Rec is set to
On, these other recording modes are forcibly set to Off.
Recording a proxy
Start the recording after completing the required
setting.
Press the record button.
Notes
• If the camcorder is turned off or the SD card is
removed while the SD card is being accessed, the
integrity of data on the card cannot be guaranteed. All
data recorded on the card may be discarded. Always
make sure the access indicator is off before turning off
the camcorder or removing the SD card.
• Take caution to prevent the SD card from flying out
when inserting/ejecting the card.
To exit, stop the recording.
When the recording on memory cards in the
memory card slots is stopped, proxy recording is
also stopped.
Setting the picture size
Select Proxy Rec >Proxy Format in the
Recording menu, and set the picture size.
Setting the audio channel
Select Proxy Rec >Audio Channel in the
Recording menu, and set the audio channel for
proxy recording.
The file name extension is “.mp4”.
The timecode is also recorded simultaneously.
The recorded file is stored under the “/PRIVATE/
PXROOT/Clip” directory.
The file name consists of the clip name recorded
on the memory cards in the memory card slots
and a consecutive number suffix.
In 2-slot Simul Rec mode, the clip name of slot A
has precedence.
• The consecutive number is kept even if the camcorder
is turned off. The consecutive number returns to 0001
by executing All Reset.
For details about clip names, see Clip Naming
(page 110) in the Media menu.
You can record proxy data independently to an
SD card in the UTILITY SD/MS slot without
recording to a memory card in a memory card
slot.
The recording format of the proxy data is the
same as for simultaneous recording.
However, the file name is derived from the
timecode at the recording start time.
Checking the remaining capacity
Proxy recording (Proxy Rec)
Changing proxy recording settings
About the recorded file
Storage destination of the
recorded file
About the file name
Recording proxy data only