83
Re
cor
d
in
g
To use an external audio device, or a
microphone other than the internal
microphone, change the following settings.
1
Select the input source.
Set the INPUT 1 switch
H
and INPUT
2 switch
A
according to the devices
connected to the INPUT 1 jack
G
and
INPUT 2 jack
B
, respectively.
• If you connect a device that does not
s48V phantom power, a
malfunction may result from setting this
switch to MIC+48V. Check before
connecting the device.
• When there is no audio device connected to
an INPUT jack, set the INPUT switch of
that jack to LINE to prevent noise.
2
Set the input level of the
microphone.
• Set the input level of an XLR
microphone in [INPUT1 TRIM]/
[INPUT2 TRIM] in the menu (p. 157).
Adjust the level according to the
sensitivity of the microphone.
• You can set an input level between
–60 dBu (+12 dB) and –30 dBu
(–18 dB) in 6 dB increments.
The default setting is –48 dBu (0 dB).
3
Select the input source for each
channel.
1
Press the MENU button
I
.
2
Select
(AUDIO
SET)
t
[CH1
INPUT SELECT]
t
[INPUT1] with
the SEL/SET dial
J
.
3
Select
(AUDIO
SET)
t
[CH2
INPUT SELECT]
t
[INPUT2] with
the SEL/SET dial
J
.
z
Tip
• When using a stereo microphone that has two
XLR plugs, connect the left channel (L) to the
INPUT 1 jack, and the right channel (R) to the
INPUT 2 jack. Set CH-1 to INPUT 1, and CH-2
to INPUT 2.
You can record audio with a Multi-
Interface Shoe-compatible microphone.
1
Connect a compatible
microphone (sold separately) to
the Multi-Interface Shoe.
2
Select the microphone using the
menu.
1
Press the MENU button.
2
To set CH-1:
Select
(AUDIO
SET)
t
[CH1
INPUT SELECT]
t
[MI SHOE MIC]
with the SEL/SET dial.
To set CH-2:
Select
(AUDIO
SET)
t
[CH2
INPUT SELECT]
t
[MI SHOE MIC]
with the SEL/SET dial.
Recording sound from an
external audio device
Audio devices
Switch
position
External audio device
(mixer, etc.)
LINE
Dynamic microphones or
microphones with a built-
in battery
MIC
+48V powered (phantom
power) microphone
MIC+48V
Recording with a Multi-Interface
Shoe-compatible microphone
(sold separately)
Continued
,