Sony PWS-110RX1, Руководство по установке

Страница: 11 / 22

1-5 (E)
PWS-110RX1
1-5. Installing an Optional Power Unit
This process is not necessary when no power unit is added.
Power unit
Optional power supply PWSK-101
1. Remove the four screws (B3
x
8), and then remove the
rear panel (power) assembly.
2. Remove the two screws (B3
x
8), and then remove the
blank panel (power) from the rear panel (power).
Rear panel (power)
assembly
Rear panel
(power)
Blank panel
(power)
B3
)
8
B3
)
8
3. Insert the power unit.
n
Make sure that the power unit has been locked after the
insertion. (The power unit cannot be drawn out by
pulling the handle without pulling up the lever.)
Power unit
4. Align the hole to the boss, attach the rear panel (power),
and then tighten the four screws (B3
x
8).
n
First tighten the screw (a) shown in the illustration, and
then tighten the other three screws.
Rear panel
(power)
Hole
B3
)
8
(a)
B3
)
8
Boss