Sony PWS-110RX1, Руководство по установке

Страница: 14 / 22

1-8 (E)
PWS-110RX1
1-6-2. Removing the Front Panel
Loosen the two anti-drop screws, and remove the front
panel.
Anti-drop screw
Front panel
Anti-drop screw
1-6-3. Mounting to Rack (M5 Screw Holes)
Refer to the RMM-10 Installation Manual.
n
When fixing the rack angles of the unit to the rack, use the
screws (B5
x
12) supplied with the unit.
B5
)
12
B5
)
12
1-6-4. Mounting to Rack (Square Holes)
Tighten the screws at the tightening torque below.
Tightening torque: 120
x
10
_
2
N
.
m {12.2 kgf
.
cm}
1. Attach the rack brackets in the side panels of the unit
with the specified six screws (B4
x
6).
Rack bracket
Rack bracket
B4
)
6
B4
)
6
2. Remove the release paper of the plate nut (M5) and
stick the plate nut to the front of the adaptor.
n
.
Align the adaptor with the plate nut (M5) at the top
edges and at the lateral edges.
.
Make sure that the centers of holes of the adaptor
and the plate nut (M5) are aligned.
(The following figure shows the left adaptor.)
Adaptor
Release paper
Plate nut (M5)
Plate nut (M5)
Adaptor
Holes
Plate nut (M5)