background image

2 (E)

PWS-110RX1

Manual Structure

Purpose of this manual

This manual is the installation manual of Network RX Station PWS-110RX1.
This manual is intended for use by system engineers and service engineers, 
and provides helpful information for installing PWS-110RX1, such as operating 
environment, installation space, connection information, initial settings and so on.

Related manuals

Besides this Installation Manual, the following manuals are available for PWS-
110RX1.

.

  Operation Manual (Supplied with this unit)

This manual contains information required to operate and use the unit.

.

  Service Manual (Available on request)

This manual describes service overview, error messages, periodic maintenance and 
inspection, replacement of main parts, and so on of the unit to provide information 
required for block-level service.

.

  Installation manual for RMM-10 (Supplied with RMM-10)

This is necessary to install the unit to a 19 inch equipment rack.

Trademarks

Trademarks and registered trademarks described in this manual are as follows.

.

 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI 

Logo are trademarks or registered trademarks of HDMI Licensing LLC in the 
United States and other countries.

Other system names and product names written in this manual are usually registered 
trademarks or trademarks of respective development manufacturers.

Содержание PWS-110RX1























Отзывы: