PRS-T1
4
Note:
Follow the disassembly procedure in the numerical order given.
2-2. CASE REAR ASSY
Note:
Please spread a sheet under a
unit not to injure case front.
2
four claws
4
five claws
5
five claws
6
4
five claws
case rear assy
case front assy
Top side:
1
Insert the jig in the gap between case
rear assy and case front assy.
Then slide it to arrow direction to remove
claws of case rear assy.
JIG
When disassembling the set, use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
7
case rear assy
– Rear bottom view –
– Rear bottom view –
3
Insert the jig in the gap between case
rear assy and case front assy.
Then slide it to arrow direction to remove
claws of case rear assy.
Right side:
case rear assy
case front assy
Left side:
case rear assy
case front assy
3
Insert the jig in the gap between case
rear assy and case front assy.
Then slide it to arrow direction to remove
claws of case rear assy.
