Sony PMW-TD300, Руководство по эксплуатации

Страница: 147 / 185

Assigning Functions to Assignable Switches 147
Ch
apt
er 6 Men
u
and
Det
a
iled Set
tings
Zoom Tele/Wide Assign the Zoom Tele function to ASSIGNABLE 4, and
assign the Zoom Wide function to ASSIGNABLE 5
(displayed only when <4> and <5> are set). —
Zoom Wide/Tele Assign the Zoom Wide function to ASSIGNABLE 4, and
assign the Zoom Tele function to ASSIGNABLE 5
(displayed only when <4> and <5> are set). —
Manual Focus Assist Turn the manual focus assist function on or off. Setting retained
Focus Mag Turn the focus magnification function on or off. Setting not retained
Zebra Turn zebra display on or off. Setting not retained
Lens RET During recording or playback: Write a shot mark.
In the other states: Conduct a recording review
(if playback is allowed).
—
Shot Mark1 Write Shot Mark1. —
Shot Mark2 Write Shot Mark2. —
OK Mark Add or delete an OK mark. —
Color Temp SW 3200K Adjust the white balance with a 3200K preset value. Setting retained
Color Temp SW 4300K Adjust the white balance with a 4300K preset value. Setting retained
Color Temp SW 5600K Adjust the white balance with a 5600K preset value. Setting retained
Color Temp SW 6300K Adjust the white balance with a 6300K preset value. Setting retained
Electrical CC Function that switches the electrical CC filter (3200K/
4300K/5600K/6300K) applied to white balance
adjustment values.
Each press of the switch or button switches in the order
3200K
t
4300K
t
5600K
t
6300K.
These can also be applied from a menu (apply with
Electrical CC<A><B><C><D>).
Note
This function is not available when White Filter >ND
Filter C.Temp in the Maintenance menu is set to On.
If you set ND Filter C.Temp to On after assigning the
function, the assignable switch ceases to function.
Setting retained
CC5600K Apply a 5600K electrical CC filter to white balance
adjustment values. Setting retained
Slot Select Switch memory card slot (A or B). —
Grid(VF) Turn the grid display in the viewfinder on or off. Setting retained
Convergence Record the convergence point distance when
Convergence is assigned to the assignable switch, and set
the convergence point to the recorded distance when the
assignable switch is used.
You can record different convergence point distances in
multiple assignable switches.
When you press an assignable switch with the SHIFT
button held down, the current convergence point distance
will be recorded. —
Assignable switch setting Function State when camcorder
is next powered on