Sony PCV-RS101 - Vaio Desktop Computer, Справочное руководство системы

Страница: 51 / 94

Upgrading and Maintaining Components
35
Installing Memory Modules
Your system supports PC2100 DDR-SDRAM DIMM memory modules.
The DDR-SDRAM DIMM memory modules can be single- or double-
sided and installed in either socket.
1
Choose the size of the memory module and configuration as shown
in the following table. Memory modules can vary in size and speed
between sockets. The minimum memory size is 128 MB. The
maximum memory size is 1.0 GB. The BIOS automatically detects the
type, size and speed of the memory modules.
2
Remove the side panel (see “Removing the cover” on page 24).
3
Remove the power supply (see “Removing the Power Supply” on
page 44).
4
If necessary, remove the memory module you wish to replace (see
“Removing a memory module” on page 32).
5
If necessary, remove any previously installed PCI cards.
6
Remove the new memory module(s) from its anti-static package.
Hold the memory module only by its edges to prevent static-
electricity damage.
!
Before opening the system unit, save and close all open files, exit all open
applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.
Memory module configurations (MB)
*
* Your computer ships with at least 512 MB of memory and is expandable to 1.0 GB.
Your model may ship with more than 512 MB DDR-SDRAM depending on the
configuration you purchased.
DIMM1 DIMM2
0, 128, 256, 512 0, 128, 256, 512
✍
Use only PC2100 memory. Your system does not support EDO, buffered DDR-
SDRAM, or PC100/133 SDRAM memory.
!
Touch any exposed metal portion of the chassis to discharge static
electricity in your body before handling a memory module.