Sony PCV-RS101 - Vaio Desktop Computer Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 94

background image

vii

Regulatory Information

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:

❑

Reorient or relocate the receiving antenna.

❑

Increase the separation between the
equipment and the receiver.

❑

Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.

❑

Consult the dealer or an experienced radio/
TV technician for help.

You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.

Only peripherals (computer input/output devices,
terminals, printers, etc.) that comply with FCC Class
B limits may be attached to this computer product.
Operation with noncompliant peripherals is likely
to result in interference to radio and television
reception.

All cables used to connect peripherals must be
shielded and grounded. Operation with cables,
connected to peripherals, that are not shielded and
grounded, may result in interference to radio and
television reception.

Declaration of Conformity

Trade Name:

SONY

Model No.:

PCV-2200/2210

Responsible Party:

Sony Electronics Inc.

Address:

680 Kinderkamack Rd
Oradell, NJ 07649

Telephone: 201-930-6972

This phone number is for FCC-related
matters only.

This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions:

(1) This device may not cause harmful
interference, and

(2) this device must accept any interference
received, including interference that may
cause undesired operation.

«
...
5
6
7
8
9
...
»

Содержание PCV-RS101 - Vaio Desktop Computer































































































Отзывы:

Нет отзывов

Похожие инструкции для PCV-RS101 - Vaio Desktop Computer

Бренд: IBM Страницы: 230

Бренд: Aaeon Страницы: 90

Бренд: Büttner Elektronik Страницы: 36

Бренд: Zotac Страницы: 57

Бренд: Wincomm Страницы: 58

Бренд: AB Quality Страницы: 24

Бренд: Sealey Страницы: 2

Бренд: Sealey Страницы: 2

Бренд: Sealey Страницы: 2

Бренд: Sealey Страницы: 2

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 4

Бренд: Sealey Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды