Sony PCSXL55, Руководство по эксплуатации

Страница: 81 / 261

81
Registering Local Information
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
Enabled: Permits access via Telnet.
Disabled: Prohibits access via Telnet.
SSH Access
Allows you to select whether to permit
access to the Communication System via
SSH (Secure Shell).
Enabled: Permits access via SSH.
Disabled: Prohibits access via SSH
Other
Use History
Select whether to display the history lists in
order to use for dialing, etc.
On: Displays the history lists.
Off: Does not display the history lists.
Save Setup
Saves the data for each setting to a “Memory
Stick”. The data for each setting saved on the
“Memory Stick” is overwritten.
Phone Book and History data are not saved.
Load Setup
Loads the data for each setting from a
“Memory Stick”. The data for each setting
saved on the System is overwritten.
When saving and loading settings, make sure
that the version of the system from which the
data was originally saved is the same as the
version of the local system. If the versions
differ, the data may not be properly recognized.
AMX Device Discovery
Select whether to export AMX Device
Discovery information onto the network.
Off: Disables this function.
On: Enables this function.
When the AMX system is connected to the
Communication System via serial
connection, AMX Device Discovery
information is output via that serial
connection.
AMX systems are external control devices
that can be used to control the
Communication System. When the AMX
system receives Device Discovery
information from the Communication
System, the System automatically falls
under the control of the AMX system.
HOP
Enter a number from 0 to 255 as the HOP
Display Terminal Name.
Auto Restore
Allows you to select whether to
automatically turn on the Communication
System if an power interruption occurs and
is then restored.
On: Enables the Auto Restore function.
Off: Disables the Auto Restore function.
Internet Protocol
IPv4: Uses the internet protocol version 4
(IPv4) that is commonly used.
IPv6: Uses the next-generation internet
protocol version 6 (IPv6).
IPv4/IPv6: Uses both IPv4 and IPv6.
When “Internet Protocol” is set to “IPv6” or
“IPv4/IPv6”, some of the functions of this
system are restricted, and some of the
Administrator setup menus are not displayed.
For details, see “Restrictions on the Use of
IPv6” on page 87.
Phone Book
Save Phone Book
Allows you to save the data in the Phone
Book on a “Memory Stick”. The data
already stored on the “Memory Stick” is
overwritten.
Load Phone Book
Allows you to load the data in the Phone
Book from a “Memory Stick.” The data
already stored in the Phone Book is
overwritten.
When loading Phone Book data, make sure that
the version of the system from which the data
was originally saved is the same as the version
of the local system. If the versions differ, the
data may not be properly recognized.
Note
Note
Administrator7
Note
Note
Administrator8