124
Adjusting the Sound
You can turn off the sound to be sent to a remote party when you have
answered a call from the remote party.
If you set “Mic on Answer” to “Off” in the Answer setup menu, only the
picture on the local party will be sent to the remote party when answering a
call. The
indicator appears on the monitor screen.
For the setting, see “Mic on Answer” in the Answer setup menu on page 58.
To send the sound to the remote party
Press the MIC ON/OFF button on the Remote Commander.
The
indicator disappears and the sound is heard by the remote party.
During the communication a time lag may occur between the sound and
picture to be sent to the remote party, which prevents smooth communication.
Using the Lip Sync function adjusts to synchronize audio and video. However,
this may delay transmission of audio synchronized with video.
The Lip Sync function is enabled if you set “Lip Sync” to “Auto” on the Basic
Setup1 page in the Audio setup menu.
For the setting, see “Lip Sync”in the Audio setup menu on page 63.
To enable the Lip Sync function of the remote party, you have to ask them to do so.
The Communication System is equipped with the echo canceller function,
allowing the echo that occurs during audio transmission to be reduced.
Setting “Echo Canceller” to “On” on the Basic Setup1 page in the Audio setup
menu activates the built-in echo canceller.
Turning Off the Sound on Answering – Mic on Answer Function
Synchronizing Audio and Video – Lip Sync Function
Note
Reducing Echo – Echo Canceller
NEAR
NEAR
Содержание PCSXL55
Страница 261: ...Sony Corporation ...