60
Registering Local Information
When the remote system does not support the
audio mode selected by the local site, the mode
automatically becomes “G.711”.
Far End Camera Control
Allows you to select whether to enable the
control of each other’s cameras from each
other’s site.
When “Individual Settings for Point-to-
Point/Multipoint” for IP is set to “On”, you
can set this item individually for point-to-
point and multipoint connections.
On:
Enables the control of each other’s
cameras. Normally, set to “On”.
Off:
Disables the control of each other’s
cameras.
H.239
Use of the presentation mode complying
with H.239 allows you to transmit the
presentation data and picture from the
camera simultaneously.
This item allows you to select whether to use
the presentation mode based on the H.239
presentation standard.
On:
Enables the presentation mode based on
the H.239 presentation standard.
Off:
Disables the presentation mode based
on the H.239 presentation standard.
H.239 Ratio
When H.239 presentation transmissions are
made with the system, the H.239
presentation data shares bandwidth with
camera images that are also being sent. This
setting allows you to select how much of the
total bandwidth to use for H.239
presentation data transmissions.
2/3:
Use 2/3 of the total bandwidth for H.239
presentation data transmissions.
1/2:
Use 1/2 of the total bandwidth for H.239
presentation data transmissions.
1/3:
Use 1/3 of the total bandwidth for H.239
presentation data transmissions.
Screen Size
Allows you to select the screen size of the
picture to be transmitted or received.
When “Individual Settings for
Transmission/Reception” or “Individual
Settings for Point-to-Point/Multipoint” on
the IP page is set to “On”, you can set this
item for transmission and reception, and
point-to-point and multipoint connections
individually.
You can select from among 720, W4CIF,
W432P, WCIF, 4CIF, CIF, QCIF and
AUTO.
Video Mode
Allows you to select the compression format
of pictures to be transmitted or received.
When “Individual Settings for
Transmission/Reception” or “Individual
Settings for Point-to-Point/Multipoint” on
the IP page is set to “On”, you can set this
item for transmission and reception, and
point-to-point and multipoint connections
individually.
You can select from among H.261, H.263+,
and H.264.
Video Frame
Allows you to select the number of video
frames during transmission or reception.
When “Individual Settings for
Transmission/Reception” or “Individual
Settings for Point-to-Point/Multipoint” on
the IP page is set to “On”, you can set this
item for transmission and reception, and
point-to-point and multipoint connections
individually.
15fps:
Send pictures at a maximum rate of
15 frames per second.
30fps:
Send pictures at a maximum rate of
30 frames per second.
60fps:
Send pictures at a maximum rate of
60 frames per second.
AUTO:
Switch the number of frames
automatically.
ISDN
The menu is used to set up the
communication mode for an ISDN
connection.
Individual Settings for Point-to-Point/
Multipoint
Allows you to select whether to configure
the ISDN settings for point-to-point and
multipoint connections individually.
Off:
Select to configure the ISDN settings
for both connections commonly.
Note
Communication
Содержание PCSXL55
Страница 261: ...Sony Corporation ...
