Sony PCM-3324S, Быстрая справка

Страница: 83 / 90

79
(Continued)
26-5. If the SYSTEM ALARM Lamp Lights
On the PCM recorder
This lamp lights if there is a fault in the system.
If this lamp lights, note the error code shown in the tape time display, turn off the
power, and consult your Sony service representative.
Warning codes and meanings
Error code Meaning
E.01-01 POWER STATUS error. At least one of the power supplies except the VARI
power does not start up.
E.01-02 +12 V supply has failed.
E.01-03 –12 V supply has failed.
E.02-02 D BUS error
E.02-03 A BUS error
E.02-04 RAM check error
E.02-05 ROM check error
E.02-06 AUPC71059 interrupt controller write/read check error
E.02-07 AUPC71059 interrupt controller write/read check error
E.02-08 ATMP82C79 keyboard/display controller write/read check error
E.02-09 WAIT control circuit error
E.02-10 TCG EXT ROUTE error
E.02-11 TCG PB ROUTE error
E.02-12 PB DELAY, REC DELAY error
E.02-13 EEPROM read/write check error
E.03-02 TCR loop test, PB FORMAT error
E.03-03 TCR loop test, EXT FORMAT error
E.03-04 TCR loop test, PB STATUS error
E.03-05 TCR loop test, EXT STATUS error
E.03-06 PB REGEN test error
E.04-01 CTK board not installed.
E.04-02 INTERNAL WORD cycle check error
E.04-03 INTERNAL SECTOR cycle check error
E.04-04 REC counter or ISA or ESA data check error (normal speed)
E.04-05 DECODE DELAY check error
E.04-06 ENCODE DELAY check error
E.04-07 DEC RANGE check error (normal speed)
Warning Lamps