Sony PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz, Руководство пользователя

Страница: 147 / 155

Troubleshooting Your Computer
What do I do if my computer won't start?

Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator
shows the power is on.
 Make sure the battery is inserted properly and charged.
 Make sure the floppy disk drive (if applicable) is empty.

If the computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or
UPS is turned on and working.

If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the
brightness and contrast controls are adjusted correctly. See the guide that came with your display for details.
 Disconnect the AC adapter and remove the battery. Wait one minute. Reattach the AC adapter and reinsert the
battery. Turn on the power.

Condensation may cause the computer to malfunction. If this occurs, do not use the computer for at least one hour.
What do I do if a BIOS error appears when my computer starts?
If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of the screen, follow these steps:
1. Press F2 . The BIOS Setup menu appears.
2.
Set the date (month/day/year). Press Enter .
3. Press the Down Arrow key to select System Time , and then set the time (hour: minute: second). Press
Enter .
4.
Press the Right Arrow key to select the Exit tab, and then press the Down Arrow key to select Get
Default Values . The message Load default values for all SETUP items appears.
5. Press Enter . The Setup Confirmation window appears.
6. Select Yes , and press Enter .
7.
Select Exit (Save Changes) , and press Enter . The Setup Confirmation window appears again.
8.
Select Yes , and press Enter . The computer restarts.
If this occurs on a regular basis, contact Sony Computing Support ( http://www.sony.com/pcsupport ).
What do I do if the message "Operating system not found" appears when my computer starts, and why won't
Windows start?
 Make sure the computer does not have a "non-bootable" floppy disk in the floppy disk drive (if applicable).
 If a non-bootable floppy disk is in the drive:
1. Remove the floppy disk.
2.
Restart the computer and confirm that the Microsoft
®
Windows
®
operating system starts properly.

If Windows still does not start, follow these steps to initialize the BIOS:
1. If there is a disk in the floppy disk drive, then remove it.
2. Turn off the computer.
3. Remove any peripheral devices connected to the computer.
4.
Restart the computer.
Page 147