NW-A100TPS/A105/A105HN/A106HN
17
Sony CONFIDENTIAL
For Authorized Servicer
5-3-3. Checking the PC con
fi
guration setting
Check that the operation con
fi
guration is set correctly to the using
PC for execute the pre-installed content setting.
Checking procedure:
All of “Checking the PC con
fi
guration setting” will operate on the
PC.
1. Double click “2_adb_check.bat” in the “NWA100ZX500_Init_
ServiceTool_1.00.00” folder.
NWA100ZX500_
Init_ServiceTool_
x.xx.xx
1_java_check.bat
2_adb_check.bat
adb-setup-1.4.3.exe
2. Check the “Android Debug Bridge version”
fi
eld on the display
screen.
check
Note 1:
If operation con
fi
guration is not setting on the PC, sentences with
unrecognized content will be displayed.
In that case, refer to “5-3-2. PC con
fi
guration setting” on page 16
and make the settings.
Note 2:
If the version is “1.0_xxx” or later, it is set normally.
3. Press any key on the PC keyboard and close the display screen.
4. Complete the checking the PC con
fi
guration setting.
This completes the checking the PC con
fi
guration setting.
Refer to “5-4. Perform pre-installed content setting” on the right and
perform the pre-installed content setting.
5-4. Perform pre-installed content setting
Write the pre-installed content on the WALKMAN main unit.
Used tool (folder name):
Pre-installed content
Note
1:
Select and use the folder of the color name that conforms to
body color.
Except
CH
Folder name
Body color
NW-A100_Contents_WW_Black
Black
NW-A100_Contents_WW_Blue
Blue
NW-A100_Contents_WW_Green
Ash Green
NW-A100_Contents_WW_Orange
Orange
NW-A100_Contents_WW_Red
Red
CH
Folder name
Body color
NW-A100_Contents_CN_Black
Black
NW-A100_Contents_CN_Blue
Blue
NW-A100_Contents_CN_Green
Ash Green
NW-A100_Contents_CN_Orange
Orange
NW-A100_Contents_CN_Red
Red
Pre-installed content setting tool
NWA100ZX500_TransferTool_x.xx
Note 2:
When checking the destination of this unit, refer to “WALKMAN
MAIN UNIT IDENTIFICATION METHOD” on page 7.
Note 3:
“x.xx” of tool name indicates the version. Be sure to use the latest
version.
Procedure:
1. Connect the WALKMAN main unit to a PC that has already
been set up with a PC operation con
fi
guration by the USB Type-
C cable.
(The power supply of the WALKMAN is automatically turned
on and test mode state)
Note 4:
If leave the connection status in the previous step, this step is not
necessary.
USB Type-C cable
– The following steps are performed on the PC –
2. Open the folders the pre-installed content and the pre-installed
content setting tool.
3. Copy the “opt2” and “opt3” folders in the pre-installed content
folder to the pre-installed content setting tool.
In the pre-installed
content folder
In the pre-installed content
setting tool folder
copy
4. In the non-selected state for
fi
les in the pre-installed content set-
ting tool folder, and put a cursor to blank space in the folder.
In the pre-installed content setting tool folder
cursor
blank space
– Continued on next page –
SYS SET
2020/02/27 22:57:21 (GMT+09:00)
