Sony MZ-B10 - Minidisc Voice Recorder Скачать руководство пользователя

Страница: 53 / 60

Messages

If the following messages flash in the display window, check the chart below.

The recorder does
not work or works
poorly.

• The record protect tab is opened.

Slide the record protect tab closed (page 46).

• While operating, the recorder received a mechanical shock, too

much static, abnormal power voltage caused by lightning, etc.

Restart the operation as follows.

Take out batteries or disconnect all the power sources.

Leave the recorder for about 30 seconds.

Insert batteries or connect the power source.

Error message

Meaning/Remedy

BLANKDISC

• An MD with no recording on it is inserted.

Insert a recorded MD.

BUSY

• You tried to operate the recorder while it was accessing the

recorded data.

Wait until the message goes out (in rare cases, it may take 2–3
minutes).

DISC FULL

• The remaining recording time on the disc is 12 seconds (SP), 24

seconds (LP2 or monaural), 36 seconds (LP4), or less.

Replace the disc.

ERROR

• There is an internal malfunction in the system.

Restart the operation by doing steps 1 to 3 on page 53. If the
message appears again, please consult your nearest Sony
dealer.

GroupFULL

• You tried to create a 100th group while editing.

You can create only up to 99 groups on a disc. Keep the group
number within 99.

Hi DC in

• Voltage of the power supply is too high (The recommended AC

power adaptor or the recommended car battery cord is not used).

Use the recommended AC power adaptor (not supplied) or the
car battery cord (not supplied).

HOLD

• The recorder is locked.

Slide HOLD against the arrow to unlock the recorder.

LOW BATT

• Batteries are weak.

Replace the dry batteries (page 12).

MEM OVER

• You tried to record with the recorder placed where it receives

continuous vibration.

Put the recorder on a stable place, and start recording again.

Содержание MZ-B10 - Minidisc Voice Recorder





























































Результаты поиска

Содержание MZ-B10 - Minidisc Voice Recorder

Отзывы:

Похожие инструкции для MZ-B10 - Minidisc Voice Recorder

Бренды по названию

Популярные бренды

Sony MZ-B10 - Minidisc Voice Recorder, Руководство по эксплуатации

Результаты поиска

Содержание MZ-B10 - Minidisc Voice Recorder

Отзывы:

Похожие инструкции для MZ-B10 - Minidisc Voice Recorder

Бренды по названию

Популярные бренды