Sony MZ-B10 - Minidisc Voice Recorder, Руководство по эксплуатации

Страница: 50 / 60

50
While playing
Symptom Cause/Remedy
An MD is not
played normally. • Repeat play is selected.
,
Change back to the normal play (page 27).
• Playback mode is changed.
,
Change back to the normal play (page 27).
An MD is not
played from the
first track. • Disc playing stopped before it came to the last track.
, Press N • PLAY for 2 seconds or more to start playing.
Playback sound
skips. • The recorder is placed where it receives continuous vibration.
,
Put the recorder on a stable place.
• A very short track may cause sound to skip.
,
Try not to create a track under one second long.
Sound has a lot of
static. • Strong magnetism from a television or such device is interfering
with operation.
,
Move the recorder away from the source of strong magnetism.
The volume of the
recorded track is
low. • The track was recorded in analog mode (in digital mode, the
recording level is automatically set to the same level as that of the
sound source). Or you used a connecting cord with an attenuator
(such as an optional RK-G128, RK-G134, etc.) .
,
Use a correct connecting cord (such as RK-G129, RK-G136,
etc.).
No sound comes
through the
headphones/
earphones. • The headphones/earphones plug is not firmly connected.
,
Plug in the plug of the headphones/earphones firmly to the i
jack.
• The plug is dirty.
, Clean the plug.
The recorder skips
several tracks
ahead or behind
whenever you
press the
.
•
REVIEW • AMS
or
>
• CUE •
AMS button.
• The GROUP button has been pressed and is flashing in the
display.
, The recorder returns to normal if no operation is made for 5
seconds.
The edited tracks
may exhibit sound
dropout during
search operations. • This occurs due to the MiniDisc system limitation. The
fragmentation of data may cause sound dropout while searching
because the tracks are played in higher speed than normal
playback.