58
To check the setting
Press TIMER SELECT and turn the jog dial to
select the respective mode (DAILY 1 or
DAILY 2), then press ENTER/NEXT. To
change the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and turn the jog dial to
select “OFF,” then press ENTER/NEXT.
Tip
The power turns on 15 seconds before the preset
time.
Note
When setting the wake-up timer, set the equalizer
display to anything other than Spectrum analyzer
pattern 3. (See “To change the equalizer display” on
page 51.)
VOLUME
1
VOLUME
1
4
Turn the jog dial to select DAILY 1
or 2, then press ENTER/NEXT.
“ON” appears and the hour digits flash
in the display.
5
Set the time to start playback.
Turn the jog dial to set the hour, then
press ENTER/NEXT.
The minute indication starts flashing.
Turn the jog dial to set the minute, then
press ENTER/NEXT.
The hour indication flashes again.
6
Set the time to stop playback
following the above procedure.
7
Turn the jog dial until the music
source you want appears.
The indications change as follows:
TUNER
˜
CD PLAY
˜
TAPE PLAY
8
Press ENTER/NEXT.
The start time, followed by the stop time
and the music source, appears, then the
original display appears.
9
Turn off the power.
Waking up to music (continued)
n
n
