Basic Operations
15
Tips
• Pressing
·∏
when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
·∏
or the DISC 1 – 3 buttons (Automatic Source
Selection).
• If there is no CD in the player, “CD NO DISC”
appears in the display.
• When a disc tray is selected or the CD placed on
that tray is playing, the DISC 1 – 3 button for the
respective tray lights green.
To
Do this
Stop playback
Press
p
(or
π
on the remote).
Pause
Press
·∏
(or
∏
on the
remote). Press again to resume
playback.
Select a track
During playback or pause,
turn the jog dial clockwise (to
go forward) or
counterclockwise (to go back)
and release it when you reach
the desired track. Or press
±
(to go forward) or
≠
(to go back) on the remote.
Find a point in
Press and hold down
)
or
a track
0
(or
º
/
‚
on the
remote) during playback and
release it at the desired point.
Select a CD
Press a DISC 1 – 3 button or
in stop mode
DISC SKIP EX-CHANGE (or
D. SKIP on the remote).
Play only the
Press 1/ALL DISCS
CD you have
repeatedly until “1 DISC”
selected
appears.
Play all CDs
Press 1/ALL DISCS repeatedly
until “ALL DISCS” appears.
Remove the CD Press
§
OPEN/CLOSE.
Exchange other
Press DISC SKIP
CDs while
EX-CHANGE (or D. SKIP on
playing
the remote).
Adjust the
Turn VOLUME (or press
volume
VOL +/– on the remote).