![background image](http://html.mh-extra.com/html/sony/mhc-v808/mhc-v808_operating-instructions-manual_1330131063.webp)
63
Tape Deck
The tape does not record.
• No tape in the cassette holder.
• The tab has been removed from the
cassette (see “To save a tape
permanently” on page 60).
• The tape has reeled to the end.
The tape does not record nor play or there
is a decrease in sound level.
• The heads are dirty. Clean them (see
“Cleaning the tape heads” on page 60).
• The record/playback heads are
magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
60).
The tape does not erase completely.
• The record/playback heads are
magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
60).
There is excessive wow or flutter, or the
sound drops out.
• The capstans or pinch rollers are dirty.
Clean them (see “Cleaning the tape
heads” on page 60).
Noise increases or the high frequencies are
erased.
• The record/playback heads are
magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
60).
Tuner
Severe hum or noise (“TUNED” or
“STEREO” flashes in the display.
• Adjust the antenna.
• The signal strength is too weak. Connect
the external antenna.
A stereo FM program cannot be received in
stereo.
• Press STEREO/MONO so that “STEREO”
appears.
If other troubles not described
above occur, reset the system as
follows:
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press NEXT, ENTER/NEXT, and DISC 1 at
the same time.
4
Press POWER to turn on the power.