MHC-GZR9D/GZR8D/GZR7D.GB.3-870-909-11(1)
118
GB
Additional Information
Troubleshooting
Should you encounter a problem with
your system, do the following:
1
Make sure the power cord and
speaker cords are connected
correctly and firmly.
2
Find your problem in the
troubleshooting checklist below and
take the indicated corrective action.
If the problem persists after doing all
of the above, consult your nearest Sony
dealer.
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
selector, is the voltage selector set
to the correct voltage?
Are you using only the supplied
speakers?
Are the + and
speaker cords
short-circuited?
Is anything blocking the ventilation
holes on the rear of the system?
After the STANDBY indicator
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
General
The display starts flashing as soon
as you plug in the power cord even
though you have not turned on the
system.
Press DISPLAY
once while the
system is off. The demonstration
disappears.
“– –:– –” appears in the display.
A power failure has occurred. Set the
clock (page 33) and timer settings
(page 105) again.
The system does not turn on.
Is the power cord plugged in?
Is the voltage selector set correctly to
match the local power line voltage?
(For models with a voltage selector
only)
The clock or timer setting is canceled.
The power cord is disconnected or a
power failure occurred. Redo “Setting
the clock” (page 33). If you have set
the timer, redo “Using the timer” (page
105).
There is no sound.
Press repeatedly (or
turn MASTER VOLUME on the unit
clockwise)
.
The headphones are connected to the
PHONES jack
.