1-8 (E)
MAV-70
1-6. Rack Mounting
c
.
Install the unit in a stable location.
.
Mount only with the supplied support angle kit.
This unit can be mounted in a 19-inch standard rack. Use
the following support angle kits and parts.
n
Mount the unit in the rack with the HDD removed from the
unit.
Support angle kit : 2 kits
Components of a support angle kit
.
Outer Support Assembly
1 pc
Outer Support
1 pc
Bracket
2 pcs
Screw (
+
B 4
x
12)
4 pcs
.
Inner Support
1 pc
.
Plate Nut
2 pc
.
Screw (
+
B 4
x
12)
8 pcs
The following parts are supplied for rack mounting.
.
Rack mounting screw (
+
RK 5
x
14)
4 pcs
.
Rack mounting ornamental Washer
8 pcs
n
Standard Tightening Torque
Screw Size
Standard Tightening Torque
M3.0
0.7 to 1.0 N
.
m (7 to 10 kgf
.
cm)
M4.0
1.2 to 1.6 N
.
m (12 to 16 kgf
.
cm)
1.
Turn off the power of the rack mounted unit incorpo-
rating the HDD.
2.
Remove the four screws at the both sides of the unit,
and remove the four foot-holder assemblies while
lifting up the unit.
3.
Attach the two inner supports to the side panels with
the screws.
4.
Loosen the four screws of the outer support assembly
to slide the brackets.
1-6. Rack Mounting
B 4
x
6
Foot-holder
assembly
B 4
x
6
B 4
x
6
Inner support
Outer support assembly
Bracket
Bracket
B 4
x
12
B 4
x
12
