Sony KV-28LS60B, Руководство по обслуживанию

Страница: 12 / 74

- 12 -
21
GB
Specifications
Additional Information
TV system: Depending on your country selection: B/G/H, D/K Colour system: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Channel Coverage: VHF:
E2-E12
UHF:
E21-E69
CATV:
S1-S20
HYPER:
S21-S41
D/K:
R1-R12, R21-R69
Picture Tube: Flat Display FD Trinitron WIDE 32” (approx. 82 cm. measured diagonally) Rear Terminals
1
/
1
21-pin scart connector (CENELEC standard) including audio/video input, RGB input, TV audio/video output.
2
/
2
21-pin Scart connector (CENELEC standard) including
audio
/
video
input, RGB input, monitor audio/video output.
3
/
3
21-pin Scart connector
(SMARTLINK)
(CENELEC standard) including
audio
/
video
input, S video input, selectable
audio
/
video
output and Smartlink interface.
audio outputs (Left/ Right) - phono jacks
S
Design and specifications are subject to change without notice. Ecological Paper - Totally Chlorine Free
Side Terminals
4
S Video input – 4 pin DIN
4
video input – phono jack
4
audio input – phono jacks headphones jack
Sound Output:
2 x 20 W (music power) 2 x 10 W (RMS) Woofer: 30 W (music power) 15 W (RMS)
Power Consumption: 130 W Standby Power Consumption: 0.3 W Dimensions (w x h x d) : Approx. 891 x 504 x 584 mm. Weight: Approx. 62.2 Kg. Accessories supplied: 1 Remote Control (RM-932) 2 Batteries (IEC designated) Other features: •
100 Hz picture
•
Teletext, Fastext, TOPtext (250 page TEXT memory)
•
Sleep Timer
•
Smartlink (direct link between your TV set and a compatible VCR. For more information on Smartlink, please refer to the Instruction Manual of your VCR).
•
TV system Autodetection.
•
Dolby Virtual.
•
BBE.
•
Auto Format.
•
ACI (Auto Channel Installation).
S
22
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
Additional Information
If you continue to experience problems, have your TV serviced by qualified personnel. Never open the casing yourself.
Problem No picture (screen is dark) and no sound. Poor or no picture (screen is dark), but good sound. No picture or no menu information from
equipment
connected
to
the
Scart
connector. Good picture, no sound. No colour on colour programmes. Distorted picture when changing programmes or selecting teletext. Wrong characters appear when viewing teletext. Picture slanted Noisy picture when viewing a TV channel. No unscrambling or unstable picture whilst viewing a scrambling channel with a decoder connected through the Scart connector
3
/
3
.
Remote control does not function. The standby indicator
on the TV
flashes.
S
Solution •
Check the aerial connection.
• Plug the TV in and press the
button on the front of
the TV.
•
If the standby indicator
is on, press
TV
button on
the remote control.
•
Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to the factory settings.
•
Check that the optional equipment is on and press the
button repeatedly on the remote control until the
correct input symbol is displayed on the screen.
• Press the
+ button on the remote control.
• Check that “TV Speakers” is “On” on the “Detail Set Up”
menu.
• Check that headphones are not connected. • Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to factory settings.
• Turn off any equipment connected to the Scart
connector on the rear of the TV.
•
Using
the
menu
system,
enter
to
the
“Language/Country”
menu and select the country in which you operate the TV set.
For
Cyrillic
languages,
we
recommend
to
select
Russia
country
in
the
case
that
your
own
country
does
not
appear
in the list.
• Using the menu system, select the “Picture Rotation”
option in the “Detail Set Up” menu to correct the picture slant.
• Using the menu system, select the “Manual
Programme Preset” menu and adjust Fine Tuning (AFT) to obtain better picture reception.
• Using the menu system, select the “Noise Reduction”
option in the “Detail Set Up” menu and select “Auto” to reduce the noise in the picture.
• Using the menu system, select the “Set Up” menu. Then
enter to “Detail Set Up” option and set “AV3 Output” to “TV”.
• Check that the Decoder is not connected on the scart
2
/
2
.
•
Check
that
the
Media
Selector
on
the
remote
control
is
set
according to the device you are using (VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD
even
when
the
Media
Selector
has
been
set
correctly.
Enter
the necessary code set as explained on “Remote Control Configuration for VCR/DVD” chapter of this instruction manual.
• Replace the batteries. • Contact your nearest Sony service centre.