— 30 —
KP-46WT510
2-11-1. ID MAP TABLE
Reg.No & Name
FUNCTION
0
ID0
Selection of OSD languages & color systems
89
1
ID1
Selection of composite & s-video inputs
127
2
ID2
Selection of audio-related controls
239
3
ID3
Selection of basic system settings
98
4
ID4
Selection of basic system settings
203
5
ID5
Selection of advanced system settings
177
6
ID6
Selection of sub picture related settings
54
7
ID7
Selection of some reserved settings
24
2-12.REGISTRATION ADJUSTMENT
Change the
display mode
* When the
NTSC Full mode
adjustment has finished,
copy its data to
the next
display mode the
first time only
and be sure to
adjust in the order given.
*ADJUSTING FLOW
START
Turn on the power and wait for 10 minutes.
Set to the NTSC Full mode
Check the deflection yokes, the centering magnets,
2-pole/4-pole magnets
Set to the service mode.
MAIN DEFLECTION ADJUSTMENT (Green)
Green coarse adjustment
Green fine adjustment
Red coarse adjustment
Red fine adjustment
Blue fine adjustment
Blue coarse adjustment
Memorize the FLASH FOCUS offset data
End
Another display mode?
DEFLECTION
SUB
ADJUSTMENT
COPY*
Yes
No
2-12-1.SET-UP FOR ADJUSTMENT
2-12-2.MAIN DEFLECTION ADJUSTMENT
NOTE:
Before this adjustment, refer to section 2-11 for PJE input data
items #78-85.
1. Cover the red and blue CRT lenses with lens caps to allow only
green to show (or use the method shown in the note below for
turning off the CRTs individually without using lens caps).
2. Enter the monoscope signal and set to NTSC Full mode.
3. Enter the service mode, and select “2150D-1”.
4. Adjust “0 VPOS” and “1 VSIZ” so that the picture is displayed in the
center of the screen.
5. Adjust “2VSZ0” for 1080i vertical size adjustment.
0 VPOS
1 V
-Size
6. Select “2150D-2” and adjust “2 H-Size” so that the picture size is
within the specifi cation.
2 H-Size
SPEC
Overscan Spec. = 9%
Input Signal
H SIZE
V SIZE
Monoscope
15.6 ± 0.2 sq.
11.5 ± 0.2 sq.
7. Copy the data of the NTSC Full mode to the other display mode and,
if necessary, adjust in the other mode.
MARKING
• At the 4 sides of the screen, use a tape measure to locate
the middle.
: middle
DATA SETTING
1. Set NTSC Full mode.
2. Enter the service mode, and select “PJE”.
Содержание KP-46WT510 - 46" 16:9 Hi-scan Projection Television
