— 31 —
KP-46WT510
2-12-3.OPERATION METHOD FOR
PROJECTOR ENGINE MODE
MUTING
Category up
Adjustment
item up
Adjustment
item down
ENTER
Mode Select
(Course Adjustment
Fine Adjustment)
Internal Test signal
Color Select GRN
to BLU to RED
DISPLAY
POWER
Initialize data
(Not stored)
Category
down
MENU
Data Up/
Down
RM-Y909
1. FUNCTION OF KEYS ON COMMANDER
1
Changes adjustment item. (Item # moves up)
Marker moves clockwise from center to outside.
(In Fine Adjustment mode)
4
Changes adjustment item. (Item # moves down)
Marker moves counter clockwise from outside to center.
(In Fine Adjustment mode)
2
Changes adjustment category.
(Category # moves up)
5
Changes adjustment category.
(Category # moves down)
Joystick
Changes data value. (Up or down)
Marker moves clockwise from center
(up, down, right, and then left) to outside.
(In Fine Adjustment mode)
3
Changes adjustment color.
GRN
Æ
BLU
Æ
RED
6
Displays or changes internal test signals.
cros external signal
Æ
cros borderline
Æ
crosshatch only
Æ
dot only
Æ
off
9
Switches adjustment mode.
Coarse adjustment model
Æ
Fine adjustment mode
Press
Switches marker moving method.
Joystick
(In Fine Adjustment mode)
Joystick
5
6
3
4
keys
Æ
1
and
4
buttons
Commander Function
Buttons
Mode
Description
0
+ ENTER
READ
Reads data to NVM.
ENTER WRITE
Writes data from NVM.
7
+ ENTER
PJE
Service data initialization.
Not stored.
INITIAL
(Be sure not to use usually)
2. OPERATION METHOD FOR COARSE ADJUSTMENT
1. Enter the service mode and select “PJE”.
2. Press the “1” or “4” button on the remote commander to select the
item, and then use the joystick to change the data.
PJE
00
00
FDIS
Adjustment Item
Item No.
Data
direction:Data up
direction:Data down
Joystick
54
63
3. Select “GRN CENT”. When BLU or RED is displayed, press the “3”
button on the remote commander to change the adjustment color
in the order of GRN
Æ
BLU
Æ
RED.
4. In GRN, BLU, or RED mode, move the joystick
5
or
6
to change
the data in vertical direction, or
3
or
4
to change the data in a
horizontal direction.
5
4
3
6
GRN
000
000
CENT
Adjustment Item
Data (H)
Data (V)
Color
: Data (H) up
: Data (H) down
: Data (V) up
: Data (V) down
5. Before returning to the service mode, press the “MUTING” +
“ENTER” buttons on the remote commander to write the data.
(You must complete step 5 to write the data. If you omit step 5 the
set data is returned to the data prior to the adjustment.)
3. OPERATION METHOD FOR FINE ADJUSTMENT
1. Enter the service mode and select “PJE”.
2. Select FDIS and set the data to “01” so that the data at each
position can be displayed in fi ne adjustment mode.
Содержание KP-46WT510 - 46" 16:9 Hi-scan Projection Television
