KDF-46E3000/50E3000
KDF-46E3000/50E3000
17
1-9. LAMP DUCT REMOVAL
1 Remove 3 screws, +BVTP 3x10 TYPE2 IT-3, connecting the Lamp Duct to the Rear Cover (from the bottom of the Lamp Duct)
2 Disconnect 4 connector joints (not shown)
3 Remove Duct unit from rear cabinet.
4 Slide out Fuse unit from Lamp Duct, locating it inside of the duct.
5 Remove one screw, +BVTP 3x12 TYPE2 IT-3
6 Remove fan from Lamp Duct and take Fan cushions off from fan
7 Remove one screw, +BVTP 3x12 TYPE2 IT-3
Note: To remove each duct, lift tabs gently and release from hooks.
1
4
3
4
7
6
2
5
Rear Cabinet
Lamp Duct (EA)
Lamp Duct (EB)
Lamp Duct (EC)
Fuse Holder
SE Board
Fuse Sheet
Fuse Plate
2P Connector
(Thermal Fuse)
TE Board
Fan Cushion
Fan