KDF-46E3000/50E3000
KDF-46E3000/50E3000
33
2-4. USING THE REMOTE COMMANDER TO
VIEW SERVICE DATA
Use the buttons on the Remote Commander to access the service menu
items and adjust the data values.
Service
Menu
Category
Adjustment
Item
Item
Number
Data Value
MODEL
SERVICE
VIDEO1
WIDE ZOON 480I
NAME: KDF-46E3000
SN: 00000000
1 SN1 1
1. Access Service Adjustment Mode and select the Service Menu that
contains the Category with the Adjustment Item you want to change.
2. To change the
Category
, press 2 or 5 on the Remote Commander.
Note
: Pressing 2 or 5 only changes the categories within the
Service Menu displayed. To change a Category on one of the other
Service Menus, press the JUMP button until the correct Service
Menu is displayed.
3. To change the
Adjustment Item
, press 1 or 4 on the Remote
Commander.
2-4-1. CHANGING SERVICE DATA
The service data values have been selected to provide the best
possible viewing performance. Although some of the data values
are adjustable, the adjustments are very sensative and changing
them may reduce the picture quality of the set. The following
instructions are provided for informational purposes only.
4. To change the
Data Value
, press 3 or 6 on the Remote
Commander.
5. To save the changes, press MUTING then 0 to write into memory.
2-4-2. EXITING SERVICE MODE
After completing the changes, exit service mode.
6. To exit service mode, turn the power off by pressing POWER .
Wait 2 minutes before restarting the set to allow the fans to
completely shut down or the Service Menu will appear on the screen.
2-5. UPDATING THE MODEL INFORMATION
WHEN REPLACING THE BE BOARD
Use following instructions to update the model specifi c information
after replacing the BE Board.
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER .
3. Press 2 on the Remote Commander until the
MODEL
category
displays.
4. The fi rst adjustment item to display is
SZID
. The initial data value of
the
SZID
adjustment item is set to
0
and displays the Model name as
KDF-37H1000
. To change the Model name, press 3 on the Remote
Commander until the correct Model name displays.
3
displays
KDF-
46E3000
and
4
displays
KDF-50E3000
.
5. Press 1 on the Remote Commander until the
SN8
adjustment item
displays.
NOTE:
The
SN1
adjustment item displays fi rst, however,
SN8
allows
you to change the fi rst digit of the serial number.
6. The initial data value of the
SN8
adjustment is set to
0
and displays
the serial number as
00000000
. To change the fi rst digit of the serial
number to the correct number, press 3 on the Remote Commander
until the correct fi rst digit displays.
7. Press 4 on the Remote Commander to display the
SN7
adjustment
item.
Display
Next Category
Display
Previous Item
Increase
Data Value
Decrease
Data Value
Display
Previous
Category
Display
Next Item
Displays
Service Menus
MUTING
JUMP
Saves data
Writes data
into memory
RM-YD016
Read data
9
0
5
6
3
1
2
4
