KDF-46E3000/50E3000
KDF-46E3000/50E3000
23
Dress 8P connector from [BE] to clips on Main Brkt.
RED Tape should line up with clips. This connector
should be on top of LVDS Connector
Dress 8P connector to clip
under LVDS connector
Secure HARNESS ASSY
with 20 X 40 HIMELON tape
Install Ferrite Clamp
(146908911) to HARNESS
ASSY as shown.
Route Ballast Power as shown and
install to wire holders
Install Ballast Power to [G], install Ferrite Clamp
(146908911) and dress to wire pin on [G] as shown.
Ferrite Clamp must be vertical and
as close to Connector as possible
CRITICAL FOR EMI
CRITICAL FOR EMI
Secure Ballast Power with 20 X 40
HIMELON tape as shown
Route 4P Speaker and 9P HAE connector
as shown before installing Seperator Blk
A
After installing Separator Blk Assy ensure
4P and 9P Connetor are not pinched
between Rear cover and Separator
OVERALL ASSEMBLY (CONTINUED)
