57
Remote C
ontrol
*
If you have video equipment other than Sony brand that you want to
control with the remote control, it requires that you first program the
remote control (page 58).
qf
Power
Buttons
SAT/CABLE
*
:
Press to turn on and off the satellite receiver,
cable box, and other audio/video equipment you have
programmed into the remote control. For instructions, see
“Programming the Remote Control” on page 58.
POWER:
Press to turn on and off the TV.
qg
RESET
Press to reset the settings to the factory defaults. See pages 100
and 103. Also used to clear Favorite Channels (see page 69).
When FUNCTION is switched on DVD/VCR
z
REC
Press to record a program.
qh
TV/VIDEO
Press repeatedly to cycle through the video equipment
connected to the TV’s video inputs.
qj
DISPLAY
Press once to display the current channel number, current time,
and channel label. If set, the current channel number will
display for 10 seconds.
qk
JUMP
Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel
that was selected.
ql
0 - 9
ENTER
Press
0 - 9
to select a channel; the channel changes after 3
seconds. Press
ENTER
to change channels immediately.
w;
FAVORITES
Press to display the Favorite Channels list. For details, see
page 69.
wa
FREEZE
Press to freeze the picture. Press again to restore the picture.
For details, see “Using the Freeze Function” on page 70.
ws
i.LINK
Press to display the i.LINK Control Panel. For information on
using the i.LINK Control Panel, see page 95.
wd
MEMORY
STICK
Press to display the Memory Stick menu. For details, see
“Using the Memory Stick Viewer” on page 77.
wf
MENU
Press to display the Menu. Press again to exit from the Menu.
For details, see page 99.
wg
CH +/–
Press to scan through channels. To scan quickly through
channels, press and hold down either
CH
.
Button
Description
