A
d
mini
s
tra
ting
t
he
SNT
-V7
04
Setting the Camera – Camera setting Page
31
Setting the Camera
– Camera setting Page
When you click
Camera
on the Administrator menu,
the Camera setting page appears.
Use this page to set the functions of the camera.
Camera Channel Selection Section
A different camera setting can be performed for each
camera.
Before setting, select the channel to which the camera
you are going to set the camera functions is connected.
The channel number is the same as the connector
number
t
1 to 4 to which the camera is connected on
this unit.
Camera setting Section
The camera setting section displays different contents
due to the connected cameras. This section displays the
features only the selected camera is equipped with.
(The display below is an example of BRC-300.)
Note
To update for the changed setting, click
Apply
on the
changed item.
Camera ID
Select the address of the connected camera.
BRC-300:
Select the same number as the camera
address set with the camera address selectors on the
bottom of the camera.
For details on the camera address selectors, refer to
the Operating Instructions supplied with the camera.
Cameras not manufactured by Sony:
Select the same
number as the camera address set on the camera.
For the camera address setting, refer to the User’s
Guide or other manual supplied with the camera.
Note
For Bosch cameras, only 1 to 999 can be set as
Camera
ID
.
Image
Select
Color
or
Monochrome
.
Zoom mode
When you select
Full
, you can select the optical ×
electronic zoom. After the optical zoom becomes active,
the electronic zoom becomes active.
When you select
Optical only
, you can select the optical
zoom.
Note
When you use the electronic zoom on the connected
BRC-300, enable the electronic zoom using the menu of
the BRC-300.
Focus mode
Select the focus mode.
Select
Auto
to adjust the focus automatically.
Select
Manual
to adjust the focus manually using the
NEAR and FAR buttons on the main viewer page. If you
click the ONE PUSH AF button, the focus is adjusted
instantly. (See “Focusing” on page 22.)
White balance mode
Select the white balance mode.
You can select from among
Auto
,
Indoor
,
Outdoor
,
One push WB
,
ATW
and
Manual
.
If you select
One push WB
, the
One push trigger
button is displayed. Click the
Apply
to adjust the white
balance instantly.
If you select
Manual
, the
R Gain
and
B Gain
controls
are displayed. Set 0 to 255 for each control.
Exposure mode
Select the exposure from among
Full auto
,
Shutter
priority
,
Iris priority
and
Manual
.
The setting items required for each setting appear.
Full auto:
Adjusts the exposure automatically using the
electronic shutter, iris and gain. Select the Back light
compensation menu
On
or
Off
.
Shutter priority:
Adjusts the exposure automatically
using the iris and gain. Select the electronic shutter
speed from the Shutter drop-down list.
