Sony IPELA SNC-VM772R, Руководство пользователя

Страница: 57 / 68

Ad
minis
tra
ting t
he Camer
a
Action output Menu — Setting the Action output
57
Edge Storage Tab — Setting the
Edge Storage movie and still image
function
With Edge Storage, video or audio signal can be
recorded from the alarm detection results, such as
network block, recorded video and audio can be
streamed with the same protocol as the real-time
streaming.
Notes
• The frame rate and operability on the main viewer
may be reduced during movie or still image recording.
• The actual interval of recording a still image may be
longer than the interval you set.
• When you remove a memory card, press the SD OFF
switch, and check the SD MOUNT indicator is turned
off.
For details, refer to the Installation Manual.
• Stop the Edge Storage recording before you turn off
the power of the camera with a memory card inserted.
• Before using a memory card, format it by Format
memory card in the Initialize tab of the System menu
(“Initialize Tab” on page 21).
• A maximum of 4000 movie records can be saved to a
memory card. If the checkbox of Overwrite is not
selected when the number of records reaches 4000,
new recordings cannot be made. If the checkbox of
Overwrite is selected when the number of records
reaches 4000, the unit will begin to overwrite old
records in ascending chronological order.
• When recording H.264, the recorded data may
become very large and the video/audio may be
interrupted if the Adaptive rate control is set and other
image codec except CBR is selected. Therefore,
selecting CBR is recommended.
If you select CBR, set the video codec as follows:
– Set the
Bit rate below 8000 kbps.
– Set the I-picture interval to 3 seconds.
• When you record, set the codecs other than Codec1 to
Off in the Video codec tab of Video/Audio menu.
• When the output mode is set to HDMI , the Edge
Storage still image and the Edge Storage movie cannot
be recorded.
Common setting
SD memory card
Display the available free space of external memory.
Note
The memory card has a limited life span. It may not
record correctly when used for a long period of time. In
such a case, replace with a new memory card.
Maintenance information
Displays the status of the memory card if you are using
the memory card that corresponds to displaying
Maintenance information.
Normal : Continuous use available
Warning : Exchanging of the memory card is
recommended.
Error : SD memory card does not work. Exchange the
memory card.
Overwrite
Select On to overwrite the file when there is insufficient
memory space.
When you select the checkbox, overwrite is enabled.
Old records will be overwritten in chronological order.
When you deselect the checkbox, overwrite is
prohibited, and no recording will be performed.
Note
Records are overwritten in chronological order,
regardless of whether they are movies or still images.