68
Registering Local Information
When “Individual Settings for
Transmission/Reception” or “Individual
Settings for Point-to-Point/Multipoint” on
the IP page is set to “On”, you can set this
item for transmission and reception, and
point-to-point and multipoint connections
individually.
15fps:
Send CIF format pictures at a
maximum rate of 15 frames per second.
30fps:
Send CIF format pictures at a
maximum rate of 30 frames per second.
60fps:
Send CIF format pictures at a
maximum rate of 60 frames per second.
AUTO:
Switch the number of frames
automatically.
ISDN
The menu is used to set up the
communication mode for an ISDN
connection.
Individual Settings for Point-to-Point/
Multipoint
Allows you to select whether to configure
the ISDN settings for point-to-point and
multipoint connections individually.
Off:
Select to configure the ISDN settings
for both connections commonly.
On:
Select to configure the ISDN settings
for point-to-point and multipoint
connections individually.
The setting items and page numbers for
“ISDN: Mode” varies according to the setting
of “Individual Settings”.
ISDN: Mode
ISDN Bandwidth (Dial)
Allows you to select the number of ISDN
lines used for dialing.
When “Individual Settings for Point-to-
Point/Multipoint” on the ISDN page is set to
“On”, you can set this item for point-to-point
and multipoint connections individually.
You can select from among 1B (64K), 2B
(128K), 3B (192K), 4B (256K), 5B (320K),
6B (384K), 8B (512K) and 12B (768K).
ISDN Bandwidth (Answer)
Allows you to select the number of ISDN
lines used for answering.
You can select from among 1B (64K), 2B
(128K), 3B (192K), 4B (256K), 5B (320K),
6B (384K), 8B (512K) and 12B (768K).
Audio Mode
Allows you to select the compression format
of audio to be sent to a remote party.
You can select from among G.711, G.722,
G.728 and MPEG4 (MPEG4 AAC).
When the remote system does not support the
audio mode selected by the local site, the mode
automatically becomes “G.711”.
Far End Camera Control
Allows you to select whether to enable the
control of each other’s cameras from each
other’s site.
On:
Enables the control of each other’s
cameras. Normally, set to “On”.
Off:
Disables the control of each other’s
cameras.
H.239
Allows you to select whether to use the
presentation mode based on the H.239
presentation standard.
On:
Enables the presentation mode based on
the H.239 presentation standard.
Off:
Disables the presentation mode based
on the H.239 presentation standard.
H.239 Ratio
When H.239 presentation transmissions are
made with the system, the H.239
presentation data shares bandwidth with
camera images that are also being sent. This
setting allows you to select how much of the
total bandwidth to use for H.239
presentation data transmissions.
2/3:
Use 2/3 of the total bandwidth for H.239
presentation data transmissions.
1/2:
Use 1/2 of the total bandwidth for H.239
presentation data transmissions.
1/3:
Use 1/3 of the total bandwidth for H.239
presentation data transmissions.
Note
Communication
Communication
Note
Содержание Ipela PCS-XG80
Страница 266: ...Sony Corporation ...
