138
Adjusting the Camera
During communication pressing the F1 button on the Remote Commander
switches between the camera on the local site and that on the remote site.
When two cameras are connected, pressing the F2 button on the Remote
Commander switches between the first and second cameras.
The selected camera is shown at the top of the Camera menu.
3
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select “Preset”,
then press the ENTER button.
The Preset Setting List appears.
4
Use the
V
,
v
,
B
or
b
on the Remote Commander to select “New Entry”,
then press the ENTER button.
The Preset Save menu appears.
5
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select “Preset
Number”, then select the number to which the setting is stored.
Only the numbers that have not been used for presetting are selectable.
6
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select
“Adjustments” under “Camera Angle”, then press the ENTER button, if
you want to adjust the camera zoom and angle.
The Adjustments menu is displayed and you can adjust the zoom and
angle.
For the adjustment procedures, see “Adjusting the Camera Angle and
Zoom” on page 134.
New Entry
Back to Home
Adjustments > Preset Setting List
Local Camera : First Camera
1
2
3
4
5
6
Save
Adjustments
1
Cancel
Preset Number
Camera Angle
Thumbnails
Register in Thumbnail/List
Adjustments > Preset Save
Содержание Ipela PCS-XG80
Страница 266: ...Sony Corporation ...
