48
Registering Local Information
D 50ms:
Selects the default delay
plus 50ms.
D 100ms:
Selects the default delay
plus 100ms.
Custom:
Uses the Audio Input Delay you
set.
Audio Input Delay
When you set “Audio Input Delay Setting”
to “Custom”, you can set the delay time of
the input audio to match the image and
audio.
Audio Output Delay Setting
Allows you to set Audio Output Delay to
synchronize the audio with the video output.
Default –100ms:
Selects the default delay
minus 100ms.
Default –50ms:
Selects the default delay
minus 50ms.
Default:
Selects the default delay.
D 50ms:
Selects the default delay
plus 50ms.
D 100ms:
Selects the default delay
plus 100ms.
Custom:
Uses the Audio Output Delay you
set.
Audio Output Delay
When you set “Audio Output Delay Setting”
to “Custom”, you can set the delay time of
the output audio to match the image and
audio.
Adaptive Voice Pickup and Sound
Allows you to set the pickup range and
sound quality for the microphone according
to your environment.
The following pickup ranges for each setting
are intended as a guide, and the actual ranges
may differ depending on the microphone’s
installation location and usage environment.
Close and Natural:
Select this to pick up
sound from a close distance (within 1.5-
m radius). The quality of the picked up
sound will be more natural.
Balance:
Select this to pick up sound from a
medium distance (within 3-m radius).
This option strikes a balance between
pickup range and sound quality.
Wide and Clear:
Select this for a wider
pickup range than “Balance”. The
quality of the picked up sound will be
clearer.
Manual:
Select this to specify “Mic Noise
Reduction” and “Mic AGC” manually.
Mic Noise Reduction
This is only available when “Adaptive Voice
Pickup and Sound” is set to “Manual” and
allows you to set mic noise reduction.
You can select from “High”, “Mid”, and
“Low”. When you select “High”, noise
reduction is increased to produce a clearer
sound quality. When you select “Low”,
noise reduction is reduced to produce a more
natural sound quality.
Mic AGC
This is only available when “Adaptive Voice
Pickup and Sound” is set to “Manual” and
allows you to adjust the mic gain
automatically.
You can select from “High”, “Mid”, and
“Low”. When you select “High”, the sound
pickup range widens. When you select
“Low”, the sound pickup range emphasizes
closeness.
Sound Effect
Beep Sound
Allows you to select the volume of the beep
that sounds each time you press a button on
the Remote Commander from among
“Loud”, “Medium” and “Quiet”. You can
also select “Off” for the beep not to sound.
Sound Effect
Allows you to select the volume of output
sound when the unit starts, or when
connection starts or is disconnected from
among “Loud”, “Medium” and “Quiet”.
You can also select “Off” for the sound not
to be output.
Dial Tone
Allows you to select the volume of a ring-
back and busy tones when you are dialing
from among “Loud”, “Medium” and
“Quiet”. You can also select “Off” for the
ring-back and busy tones not to be output.
Note
Audio3
Содержание Ipela PCS-XC1
Страница 190: ...Sony Corporation ...
