6-103
HVR-HD1000J/HD1000U/HD1000N/HD1000E/HD1000P/HD1000C
3-29. Cam Gear Ass’y
Apply grease
Key Points
in Re-assembling
Dowel
B
Cam gear assy
Mode slider assy
1
Screw
(M1.4
×
1.4)
2
Cam gear ass'y
Mode gear ass'y
Cam gear assy
Cam gear assy
Mode gear assy
Cam gear shaft
Dowel
B
A
Side of inside
Side of outside
Apply grease when installing
Amount of grease: A ball of
grease of 1.0 mm diameter
Cam gear ass'y
Do not apply grease to the
locations other than those specified .
Make sure to follow the amount of
grease to be applied.
1.
Removal procedure
1) Remove the screw (special head screw M1.4
×
1.4)
1
.
2) Remove the cam gear ass’y
2
from the cam gear shaft.
2.
Attachment procedure
1) Apply grease on the specified locations of the cam gear ass’y
2
.
Amount of grease: A ball of grease of 1.0 mm diameter.
2) Move the mode slider ass’y in the direction of arrow
A
as far
as it can go.
3) Align the gear phase of the mode gear ass’y and the cam gear
ass’y
2
.
4) Install the cam gear ass’y
2
while engaging the dowel
B
of
the mode slider ass’y into the groove of the cam gear ass’y.
5) Install the screw (special head screw M1.4
×
1.4)
1
.
Tightening torque: 0.04
±
0.01 N•m (0.61
±
0.1 kgf•cm)
Ver. 1.1 2007.12