35
US
HT-XT3
4-558-560-
12
(1)
D:\NORM'S JOB\SONY HA\SO150016\HT-XT3 (PMRF
03)\4558560121_USCaFRLaES (UC2)\US\070ADD.fm
masterpage:
Right
Addi
tional
I
n
fo
rmat
ion
Precautions
On safety
Should any solid object or liquid fall
into the cabinet, unplug the system
and have it checked by qualified
personnel before operating it any
further.
Do not touch the AC power cord
(mains lead) with wet hands. Doing so
may cause an electric shock.
Do not climb on the system, as you
may fall down and injure yourself, or
system damage may result.
Do not place anything other than a TV
on the system.
On power sources
Before operating the system, check
that the operating voltage is identical
to your local power supply. The
operating voltage is indicated on the
nameplate at the rear of the system.
If you are not going to use the system
for a long time, be sure to disconnect
the system from the wall outlet. To
disconnect the AC power cord (mains
lead), grasp the plug itself; never pull
the cord.
AC power cord (mains lead) must be
changed only at a qualified service
shop.
On heat buildup
Although the system heats up during
operation, this is not a malfunction. If
you continuously use this system at a
large volume, the cabinet temperature
of the top, side and bottom rises
considerably. To avoid burning yourself,
do not touch the cabinet.
On placement
Leave the front of the system open.
Do not place the system on top of a
device that radiates heat.
Place the system in a location with
adequate ventilation to prevent heat
build-up in the system.
Do not place the system on a soft
surface (rugs, blankets, etc.) or place
anything at the rear of the system that
might block the ventilation holes and
cause malfunctions.
Do not install the system near heat
sources such as radiators, air ducts, or
in a place subject to direct sunlight,
excessive dust, mechanical vibration,
or shock.
Do not install the system in an inclined
position. It is designed to be operated
in a horizontal position only.
Do not place metal objects in front of
the front panel. It may limit reception
of radio waves.
Do not place the system in a place
where medical equipment is in use. It
may cause a malfunction of medical
equipment.
If you use a pacemaker or other
medical device, consult your physician
or the manufacturer of your medical
device before using the wireless LAN
function.
Use caution when placing the system
on a surface that has been specially
treated (with wax, oil, polish, etc.), as
staining or discoloration of the surface
may result.
Take care to avoid any possible injury
from the corners of the system.
Install the system so as not to harm
the speaker on the bottom of this
system.
The speakers of this system are not
magnetically shielded.
Do not place magnetic cards or a CRT-
type TV set on top of the system or
near it.
Additional Information
