30
GB
General
Power requirements
230 V AC, 50/60 Hz
Power consumption
110 W
Power consumption (during standby mode)
0.5 W
Dimensions (w/h/d)
430
×
63
×
289 mm
including projecting parts
and controls
Mass (Approx.)
4.6 kg
Speaker Section
SS-MSP2 Front and surround speakers
SS-CNP2 Center speaker
Speaker system
Full range, magnetically
shielded
Speaker units
70 mm
×
100 mm cone
type
Enclosure type
Bass reflex
Rated impedance
8 ohms
Power handling capacity
(Maximum input power)
100 watts
Sensitivity level
85 dB (1 W, 1m)
Frequency range
160 Hz – 20, 000 Hz
Dimensions (w/h/d)
Approx.
(MSP2) 81
×
141
×
121 mm
(CNP2) 230
×
81
×
121 mm
including front grille
Mass
Approx.
(MSP2) 0.8 kg
(CNP2) 1.0 kg
SA-WMSP3 subwoofer
Speaker system
Active subwoofer,
magnetically shielded
Speaker unit
Woofer: 20 cm cone type
Enclosure type
Acoustically Loaded Bass
Reflex
Continuous RMS power output
(6 ohms, 20 – 250 Hz)
100 W
Reproduction frequency range
28 Hz – 200 Hz
High frequency cut-off frequency
150 Hz
Input
LINE IN (input pin jack)
Power requirements
230 V AC, 50/60 Hz
Power consumption
100 W
Dimensions (w/h/d)
272
×
326
×
405 mm
including front panel
Mass (Approx.)
10 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U25 (1)
R6 (size-AA) batteries (2)
Speakers
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Sub woofer (1)
Speaker cords (long) (2)
Speaker cords (short) (3)
Speaker foot pads (24)
Coaxial digital cord (1)
Monaural audio cord (1)
Design and specifications are subject to change
without notice.
Specifications (continued)