17
GB
Hooking Up and Setting Up the Speaker System
Basic Operations
Selecting the component
Function buttons
Press a function button to select the component
you want to use.
To select
Press
VCR
VIDEO
DVD player
DVD
TV or digital
TV/SAT
satellite tuner (etc.)
Tuner
TUNER
After turning on the component you selected,
select the component and play the program
source.
MUTING
Press MUTING to mute the sound. MUTING
appears on the display when the sound is
muted. To cancel muting, press it again or turn
up the volume.
The muting function is also canceled when
turning the power off, or disconnecting the
power cord.
Checking the connections
After connecting all of your components to the
receiver, do the following to verify that the
connections were made correctly.
1
Press
?/1
to turn on the receiver.
2
Press a function button to select a
component (program source) that you
connected (e.g., DVD player).
3
Turn on the component and start
playing it.
4
Rotate MASTER VOLUME to turn up the
volume.
If you do not obtain normal sound output after
performing this procedure, see
“Troubleshooting” on page 27 and take the
appropriate measures to correct the problem.
Switching the setting of fan control
Hold down PLII button and press
?/1
to change the
fan control setup. Each time you do the procedure
above, the following setup appears.
Select
To
FAN ON*
Turn on the fan at all times.
FAN AUTO
Turn on the fan automatically
when there is sufficient speaker
output.
* Initial setting.
Basic Operations
