HT-S200F/SF200/SF201
24
Model check:
1. While entered state to the panel test mode, press the [
%
] button
on the remote control.
2. The model check mode is entered, and the LEDs light up/
fl
ash
as shown in the following
fi
gure.
light up
flash
flash
Model display:
3. Perform other panel test items or release the panel test mode.
Destination check:
1. While entered state to the panel test mode, press the [AUTO
SOUND] button on the remote control.
2. The destination check mode is entered, and the LEDs light up
as shown in the following
fi
gure.
light up
Destination: US, CND
light up
Destination: AEP, UK
light up
Destination: CH, SP, TW, TH
light up
light up
Destination: LA
3. Perform other panel test items or release the panel test mode.
MTK version check:
1. While entered state to the panel test mode, press the [
2
+]
button on the remote control.
2. The MTK version check mode is entered, and the LEDs
fl
ash/
light o
ff
(Refer to “Version display” on the right).
3. Perform other panel test items or release the panel test mode.
BT software version check:
1. While entered state to the panel test mode, press the [
2
–] but-
ton on the remote control.
2. The BT software version check mode is entered, and the LEDs
fl
ash/light o
ff
(Refer to “Version display” on the right).
3. Perform other panel test items or release the panel test mode.
BT hardware version check:
1. While entered state to the panel test mode, press the [CINEMA]
button on the remote control.
2. The BT hardware version check mode is entered, and the LEDs
fl
ash/light o
ff
(Refer to “Version display” on the right).
3. Perform other panel test items or release the panel test mode.
Version display:
“TV” LED
: The major version is indicated by the num-
ber of
fl
ashes or light o
ff
.
(Example:
1.XX)
“BLUETOOTH” LED : The minor (upper) version is indicated by
the number of
fl
ashes or light o
ff
.
(Example:
X.1X)
“USB” LED
: The minor (lower) version is indicated by
the number of
fl
ashes or light o
ff
.
(Example:
X.X1)
Display example:
Display of LEDs, if the version is “1.04”.
flash
4 times
The all LEDs light up.
The all LEDs light off.
flash
1 time
LED light up check:
1. While entered state to the panel test mode, press the [
STNDARD
]
button on the remote control.
2. The LED light up check mode is entered, and the all LEDs
light up.
The all LEDs light up.
3. Perform other panel test items or release the panel test mode.
Ver. 1.1
SYS SET
2021/02/16 22:34:59 (GMT+09:00)
