Sony HT-S200F, Руководство по обслуживанию

Страница: 22 / 54

HT-S200F/SF200/SF201
22
SECTION 3
TEST MODE
Button and LED position:
Button position
LED position
front side
RESET
It can initialize the user setting.
Procedure:
1. Touch the [
1
] button to turn the power on.
2. Touch the two buttons of the [–] and [
1
] at the same time for
about 5 seconds.
3. The all LEDs fl ash 3 times.
The all LEDs flash 3 times.
4. The reset is completed, then main unit is restart automatically.
DEMO MODE
The demo mode can be performed.
There are two methods of main unit operation or remote control
operation.
Procedure:
1. Touch the [
1
] button to turn the power on.
2. Perform a mode in operation with either the main unit or re-
mote control.
For the main unit operation:
Touch the two buttons of the [ ] and [–] at the same time for
about 10 seconds.
For the remote control operation:
Press the buttons on the remote control in the following order.
[
.
]

[ENTER]

[INPUT]

[
%
]

[INPUT]

[
%
]
3. The all LEDs fl ash 2 times.
The all LEDs flash 2 times.
4. After entering the demo mode, changed to the following set-
ting for demo mode and return to the normal display (function
LED is light up).
• Function : TV
• Volume : 36
• Sound fi eld : AUTO
• Muting : OFF
• Night mode : OFF
• Voice : OFF
• Dual Mono : MAIN
Note 1: When demo mode is performed, the operation of the [
1
] button
on the main unit and remote control is invalid. Also, when insert
the AC power cord into the wall outlet in the demo mode state, the
power is automatically turned on and the demo mode is entered.
– Continued to upper right –
Releasing method:
Perform the “RESET” on the left.
Note 2: The demo mode does not release by unplug the AC power cord.
Built in demo music:
1. While entered state to the demo mode, press the [ ] button on
the main unit.
2. The built in demo music mode is entered, the LEDs light up/
fl ash as shown in the following fi gure, and playback of built in
demo music starts.
The all LEDs flash 2 times.
light up light up
light up light up
light up light up
light up light up
Note 1: The sound fi eld is automatically changed to “MUSIC”.
Note 2: If the volume is set to 9 or less, it is automatically set to 10.
Note 3:
The function is automatically changed to “BLUETOOTH”.
3. When the playback of built in demo music is fi nished, the built
in demo music releases.
(When pressing the [ ] button on the main unit, the built in
demo music stops)
USB UPDATE MODE
This mode is guided by technical news, when update occurs.
SYS SET
2021/02/16 22:34:59 (GMT+09:00)