HT-S200F/SF200/SF201
23
PANEL TEST
It can check the key input, model, destination, version and LED
light up.
Setting procedure:
1. Touch the [
1
] button to turn the power on.
2. Press the buttons on the remote control in the following order.
[
u
]
[PLAY MODE]
[
v
]
→
[
V
]
3. The LEDs light up/
fl
ash as shown in the following
fi
gure.
The all LEDs flash 2 times.
The all LEDs light up.
4. After the LEDs light up, the panel test mode is entered.
Releasing procedure:
1. Touch the [
1
] button, the all LEDs
fl
ash 2 times.
The all LEDs flash 2 times.
2. The panel test mode is released, then return to the normal dis-
play (function LED is light up).
3. Touch the [
1
] button again to the reset is performed, the all
LEDs
fl
ash 3 times.
The all LEDs flash 3 times.
4. The reset is completed, then main unit is restart automatically.
Key input check:
1. While entered state to the panel test mode, press the [ ] but-
ton on the remote control.
2. The key input check mode is entered, and the LEDs light up/
fl
ash as shown in the following
fi
gure.
The all LEDs light up.
light up
light up
flash
3 times
3. Each time a button on the main unit is touched, LED light up/
fl
ash as shown in the following
fi
gure.
Note:
However, once a button is touched, it is no longer taken into count.
light up
light up
light up
light up
light up
light up light up
After touching the first button.
After touching the second button.
After touching the third button.
After touching the 4th button.
4. When all the buttons are touched and the check is completed,
the all LEDs continue
fl
ashing.
The all LEDs flash.
5. Perform other panel test items or release the panel test mode.
SYS SET
2021/02/16 22:34:59 (GMT+09:00)
