Sony HT-M22, Руководство по эксплуатации

Страница: 48 / 68

48
GB
Audio signals are not output from the TV’s
speaker when “AUDIO OUT” is set to “AMP”.
• TV+AMP: The sound is output from
TV’s speaker and the speakers connected
to the receiver.
• The sound quality of the playback equipment
depends on the TV’s sound quality, such as
the number of channels, and the sampling
frequency, etc. If the TV has stereo speakers,
the sound output from the receiver is also in
stereo as that of the TV, even if you play back
multi channel source.
• When you connect the receiver to an image
display equipment (projector, etc.), sound
may not be output from the receiver. In this
case, select “AMP”.
x Fast View
Lets you set the operation of Fast View.
•
AUTO: You can select HDMI input
faster than the normal selection.
• OFF: This function is not available.
BT settings menu
You can adjust the settings for Bluetooth .
x BT STANDBY
Lets you set the Bluetooth standby mode.
For details, see “Setting the Bluetooth
Standby mode” (page 36).
x BT AAC
Lets you set the Bluetooth audio codes. For
details, see “Setting the Bluetooth audio
codecs” (page 37).
SYSTEM settings menu
You can customize the settings of the
receiver.
x DIMMER
Lets you adjust the brightness of the
display panel.
•
DIMMER ON: The brightness of the
display is reduced.
• DIMMER OFF: The brightness of the
display remain unchanged.
x
MAIN ILLUM.
Lets you adjust the lighting status of the
front panel LEDs.
•
ON: The front panel LEDs lighting status
turns on.
• OFF: The front panel LEDs lighting
status turns off.
x AUTO STBY
Lets you set the receiver switch to standby
mode automatically when you do not
operate the receiver or when there is no
signals input to the receiver.
•
STBY ON: Switches to standby mode
after approximately 20 minutes.
• STBY OFF: Does not switch to standby
mode.
• This function does not work when TUNER
input is selected.
• If you use the Auto standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
x
NAME IN
• Lets you set the name of inputs. For
details, see “Naming inputs” (page 27).
Note
Notes
Notes