Sony HT-AF5, Руководство по эксплуатации

Страница: 73 / 80

73 GB
Ad
dit
ion
al I
n
fo
rmatio
n
No sound is output from the system
and TV speaker while using the System
Audio Control function.
• Make sure the TV is compatible with the
System Audio Control function.
• If you cannot listen to the sound of a
component connected to the system
– Select the appropriate input when you
want to watch a program on a
component connected via HDMI
connection to the system.
– Change the TV channel when you want
to watch a TV broadcast.
– Select the component or input you want
to watch when you watch a program on
the component connected to the TV.
Refer to the operating instructions of the
TV on this operation.
When the system is in standby mode,
there is no image or sound on the TV.
• When the system is in standby mode,
image and sound are output from the
HDMI component selected the last time
you turned off the system. If you are
enjoying other component, play the
component and perform the One-Touch
Play operation, or turn on the system to
select the HDMI component you want to
enjoy.
• Make sure “PASS THRU” is set to “THRU
ON” in the SET HDMI menu if you
connect components not compatible with
the “BRAVIA” Sync to the system (page
46).
The volume turns down when the
output method changes from the TV
speaker to the system’s speakers.
• The Volume Limit function is working
(page 44).
S-AIR function
S-AIR connection is not established
(sound transmission is not
established), e.g., the indicator of the
S-AIR sub unit turns off, flashes, or
turns red.
• If you use another S-AIR main unit, place
it more than 8 m away from this S-AIR
main unit.
• Confirm the ID of the S-AIR main unit and
S-AIR sub unit are the same (page 52).
• Another S-AIR sub unit is paired to the
S-AIR main unit. Pair the desired S-AIR
sub unit with the S-AIR main unit
(page 53).
• Place the S-AIR main unit and S-AIR sub
unit separately from other wireless
devices.
• Avoid using any other wireless devices.
• The S-AIR sub unit is turned off. Make
sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.
No sound is heard from the S-AIR
product.
• If you use another S-AIR main unit, place
it more than 8 m away from this S-AIR
main unit.
• Confirm the ID of the S-AIR main unit and
S-AIR sub unit are the same (page 52).
• Confirm the pairing setting (page 53).
• Place the S-AIR main unit and S-AIR sub
unit closer to each other.
• If you are using any equipment that
generates electromagnetic energy such as
a microwave oven near an S-AIR
products, turn off the equipment and try
using the S-AIR product again after
waiting for a short time.
• Place the S-AIR main unit and S-AIR sub
unit separately from other wireless
devices.
• Avoid using any other wireless devices.
• Change the “RF CHANGE” setting
(page 58).
• Change the ID settings of the S-AIR main
unit and S-AIR sub unit.
continued