Sony HT-AF5, Руководство по эксплуатации

Страница: 64 / 80

64 GB
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have short-circuit
problem.
Note
The test tone signals are not output from the HDMI
OUT jack.
x AUDIO DRC
You can compress the dynamic range of the
sound track. This may be useful when you
want to watch movies at low volumes.
AUDIO DRC only applies to Dolby Digital
sources.
• DRC OFF: Does not compress dynamic
range.
• DRC STD: Compress dynamic range as
intended by the recording engineer.
• DRC MAX: Compress dynamic range
dramatically.
Tip
Audio dynamic range compression lets you
compress the dynamic range of the soundtrack based
on the dynamic range information included in the
Dolby Digital signal.
“DRC STD” is the standard setting, but it only
enacts light compression. Therefore, we recommend
using the “DRC MAX” setting. This greatly
compresses the dynamic range and lets you view
movies late at night at low volumes. Unlike analog
limiters, the levels are predetermined and provide a
very natural compression.
You can adjust the tonal quality (bass/treble
level) of the front speakers.
x BASS
x TREBLE
To adjust the front speakers tone
level
1
Press
V
/
v
repeatedly until “BASS” or
“TREBLE” appears, the press or
b
.
2
Press
V
/
v
repeatedly until the bass or treble
level you want appears, then press .
You can adjust from –6.0 dB to +6.0 dB in
0.5 dB steps.
You can make the settings for the audio to suit
your preference.
x A/V SYNC
You can delay the sound output using this
function when the image is slower than the
sound.
• SYNC OFF: Does not adjust.
• SYNC 1 - 20: Adjusts from 1 (10 ms) to
20 (200 ms) in 1 (10 ms) steps.
Notes
• You may not be able to adjust the delay between
sound and image perfectly using this function.
• This function is useful only for Dolby Digital,
DTS and Linear PCM (2ch) input by optical and
coaxial audio input signals.
x DUAL MONO
You can select the language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
• MAIN: Outputs sound of the main language.
• SUB: Outputs sound of the sub language.
• MAIN/SUB: Outputs sound of the main
language through the front left speaker and
sound of the sub language through the front
right speaker simultaneously.
TONE menu
AUDIO menu