Sony HT-AF5, Руководство по эксплуатации

Страница: 44 / 80

44 GB
Enjoying the TV sound
from the system’s
speakers
( S ystem Audio Control)
You can enjoy the TV sound from the system’s
speakers by a simple operation.
You can operate System Audio Control
function using the TV menu. For details, refer
to the operating instructions of the TV.
When System Audio Control function is
turned on, the system will turns on and
switches to the appropriate input
automatically.
TV sound is output from the system’s
speakers, and the volume of the TV is
minimized simultaneously.
You can use the System Audio Control
function as follows.
• If you turn on the system while the TV is
turned on, the System Audio Control
function will automatically be set to on and
the TV sound will output from the system’s
speakers. However, if you turn off the
system, the sound will output from the TV
speakers.
• You can adjust the system’s volume when
you adjust the TV volume.
Notes
• If System Audio Control does not function
according to your TV setting, refer to the operating
instructions of the TV.
• When you connect a TV that does not have System
Audio Control function, the System Audio Control
function does not work.
• If the TV is turned on before turning on the system,
the TV sound will not be output for a moment.
When the System Audio Control function is
active, and the output method changes from
the TV speaker to the system’s speakers
automatically, loud sound may be output
depending on the volume level of the system.
You can prevent this by limiting the maximum
volume level.
1
Press AMP MENU.
“LEVEL” appears on the display.
2
Press V / v repeatedly until
“SET HDMI” appears, then
press
or b .
3
Press V / v repeatedly until
“VOL LIMIT” appears, then
press
or b .
4
Press V / v repeatedly to select
the maximum volume level you
want, then press
.
The maximum volume level changes as
follows:
LIMIT MAX
y
LIMIT 49
y
LIMIT 48 y ...... y LIMIT 2 y
LIMIT 1
y
LIMIT MIN
5
Press AMP MENU.
The AMP menu turns off.
Notes
• This function is available only when the Control
for HDMI function is set to on.
• This function is not available when the output
method changes from the system’s speakers to the
TV speaker.
Tips
• Sony recommends that you set the maximum
volume level to a little lower than the volume you
usually listen to.
• Regardless of the maximum volume level you set,
the /– on the subwoofer and the
2
+/– on the remote are operable.
• If you do not want to limit the maximum volume
level, select “LIMIT MAX”.
Using the Volume Limit function