Chapter 8
UMID Functions
Chapter 8
UMID Functions
8-3
3
Press the F2 (USER) button.
4
The content of the setting is a character string (in
this example “ABCD”). Select any character to
change in the string by pressing the F3 (PREV)
and F4 (NEXT) buttons.
The selected character flashes.
5
Rotate the MULTI CONTROL knob to display the
desired character in the position of the flashing
character.
6
Repeat steps
4
and
5
for all of the characters that
you want to change.
7
• If you do not want to change the other items
(COUNTRY and ORGANIZATION), proceed to
step
8
.
• If you want to change the other items, press the
F1 (ITEM) button and proceed as in steps
2
to
6
.
8
Press the F5 (SET) button.
The changed settings are confirmed.
To cancel changes and exit the setup menu
Press the F6 (EXIT) button.
Time zone settings
The UMID uses the UTC (Coordinated Universal
Time) time standard. Setting this unit’s built-in
calendar clock to the local time, and then setting a time
zone to indicate the difference from global UTC
standard time allows correct UMIDs to be generated.
To set the time zone, display the HOME page of the
function menu and proceed as follows.
See Section 9-1-2 “Using the Function Menu” (page 9-2)
for more information about function menu operations.
1
With the ENTRY button in the editing control
section held down, press the F5 (MENU) button.
The error logger screen appears.
Refer to the Maintenance Manual Volume 1 for more
information about the error logger.
2
Press the F5 (SET) button.
The OFFSET TO UTC item appears.
SET
EXIT
PREV
NEXT
–
+
ERR
LOG
OFFSET TO UTC
+09:00
HOME
F1
F2
F3
F4
F5
F6
(014/023)
015 A PB DATA ERROR
ERROR LOGGER
016 V PB DATA ERROR
TAPE ERROR
ON
WARNING
ON
CONDITION
ON
*OFFSET TO UTC
+09:00
Push SET button
2001 12 24 23:59:59
014 REFERENCE MISSING
3
Press the F1 (PREV) or F2 (NEXT) button to
select the OFFSET TO UTC item, and use the
MULTI CONTROL knob or the F3 (–) and F4 (+)
buttons to set the offset to UTC time.
For example, if the local time is 9 hours in advance
of UTC, set to “+9:00”.
4
Press the F5 (SET) button.
This makes the setting effective.
