Chapter 2
Location and Function of Parts
2-16
Chapter 2
Location and Function of Parts
2-2 Connector Panel
2
Analog video input/output section
1
REF. (reference) VIDEO INPUT connectors
(BNC type) and 75
Ω
termination switch
Input a reference video signal. Input a three-valued
(positive and negative) sync signal, a video signal with
chroma burst (VBS) or a monochrome video signal
(VS). When using the loop-through connection set the
switch to the OFF position, and otherwise to the ON
position.
2
COMPONENT VIDEO OUTPUT connectors
(BNC type)
These connectors output analog component video
signals (Y/R–Y/B–Y).
3
COMPOSITE VIDEO OUTPUT connectors
(BNC type)
These connectors output analog composite video
signals.
When the setting of F4 (CHARA) in function menu
page 4 is ON, connector 3 (SUPER) outputs a signal
with superimposed time code, menu settings, alarm
messages, and other text information.
75
Ω
REF INPUT
INPUT 1125/525
OFF
ON
VIDEO OUTPUT
COMPOSITE COMPONENT
3
(SUPER)
2
1
B-Y
R-Y
Y
1
REF.VIDEO INPUT connectors
and 75
Ω
termination switch
3
Digital audio input/output section
1
AUDIO INPUT (AES/EBU) connectors (BNC
type)
Input two sets (4 channels: CH1/2 and CH3/4) of AES/
EBU format digital audio signals.
2
AUDIO OUTPUT (AES/EBU) connectors (BNC
type)
Output a maximum of 4 sets (8 channels: CH1/2, CH3/
4, CH5/6, CH7/8) of AES/EBU format digital audio
signals.
However, the HDW-2000 supports 2 sets only (4
channels: CH1/2, CH3/4).
AUDIO INPUT(AES/EBU)
CH1/2
CH3/4
AUDIO OUTPUT(AES/EBU)
CH1/2
CH3/4
CH5/6
CH7/8
1
AUDIO INPUT (AES/EBU) connectors
2
AUDIO OUTPUT (AES/EBU) connectors
2
COMPONENT VIDEO
OUTPUT connectors
3
COMPOSITE VIDEO
OUTPUT connectors
