Chapter 10
Setup Menus
Chapter 10
Setup Menus
10-9
Item number
Item name
Settings
B01
RECALL BANK 1
Set to ON to recall menu settings from menu bank 1.
B02
RECALL BANK 2
Set to ON to recall menu settings from menu bank 2.
B03
RECALL BANK 3
Set to ON to recall menu settings from menu bank 3.
B11
SAVE BANK 1
Set to ON to save current active menu settings to menu bank 1.
B12
SAVE BANK 2
Set to ON to save current active menu settings to menu bank 2.
B13
SAVE BANK 3
Set to ON to save current active menu settings to menu bank 3.
B20
RESET SETUP
Set to ON to reset current active menu settings to factory default values.
023
LOCAL KEY MAP
When MAP is selected in menu item 006, the buttons that can be operated on the
control panel of this unit when it is being controlled by remote control from
another device can be selected from the following sub-items.
The settings of each sub-item are as follows.
DIS :
Do not function.
ENA:
Function.
Sub-item
1
STOP
Select whether the STOP button functions.
2
PLAY
Select whether the PLAY button functions.
3
REC/EDIT
Select whether the REC and EDIT buttons function.
4
STANDBY
Select whether the STANDBY button functions.
5
EJECT
Select whether the EJECT button functions.
6
JOG
Select whether the JOG button functions.
7
SHUTTLE
Select whether the SHUTTLE button functions.
8
VAR
Select whether the VAR button functions.
9
FF/REW
Select whether the F FWD and REW buttons function.
10
PREROLL
Select whether the PREROLL button functions.
11
AUTO/PRE/REVIEW Select whether the AUTO EDIT, PREVIEW, REVIEW buttons function.
12
F-KEY
Select whether the F1 to F6 buttons function.
13
AUDIO/MONITOR Select whether the audio monitor signal selection buttons function.
14
EDIT PRESET
Select whether the EDIT PRESET button functions.
15
OTHERS
Select whether the ENTRY, IN, OUT, AUDIO IN, AUDIO OUT, TRIM+, TRIM–,
GS-MARK, GS-LIST, DELETE, and DMC EDIT buttons function.
029
STORED OWNERSHIP
Select whether or not to set the Stored Ownership UMID item.
off:
Do not set.
on:
Set.
To set Stored Ownership, display this item in the menu display section, and press
the F5 (SET) button to move to the Stored Ownership setting screen.
For details, see the section “To set Stored Ownership” (page 8-2).
