Sony HDVF-EL100, Руководство по эксплуатации

Страница: 43 / 50

Using the Menu
43
02 TALLY/IND UP TALLY OFF/
[ON]
For controlling the external tally lamp.
ON: Enables external tally lamp
OFF: Disables external tally lamp (Does not light up even
when the camera receives red tally signals)
UP TALLY DIM 1 to
[5]
to 10 For setting the brightness of the external tally lamp.
Raising the value increases the brightness; lowering the
value decreases the brightness.
TALLY/IND OFF/ [ON] For activating all tally lamps and indicators (ON) or
activating only the STATUS indicator (OFF).
TALLY/IND DIM 1 to
[5]
to 10 For setting the brightness of the tally lamps and indicators.
Raising the value increases the brightness; lowering the
value decreases the brightness.
03 PEAKING PEAKING MODE [STD] /PLUS For selecting a peaking mode.
STD: Standard mode
PLUS: PEAKING PLUS mode
COLOR/AREA
SEL [COLOR] /AREA/
BOTH
For selecting a peaking plus mode.
COLOR: Sharpens the edges for the selected color only
AREA: Sharpens the edges for the selected area only
BOTH: Sharpens the edges for the selected color and
area only
POSITION
a) [CNT] /UPPER/
RIGHT/LOWER/
LEFT
For selecting the effective PEAKING area when “AREA” or
“BOTH” is selected in “COLOR/AREA SEL”.
The “POSITION” settings are linked to those of the
MAGNIFICATION menu.
CNT: Sharpens the edges of the center area
UPPER: Sharpens the edges of the upper area
RIGHT: Sharpens the edges of the right area
LOWER: Sharpens the edges of the lower area
LEFT: Sharpens the edges of the left area
PEAKING UP [OFF] /ON For selecting whether to increase the peaking level by +6 dB
or not when “PLUS” is selected in “PEAKING MODE”.
OFF: RANGE setting
ON: RANGE s6 dB
COLOR DETECT EXEC For detecting the color of which its edges are to be
enhanced.
This feature is enabled only when COLOR or BOTH is
selected.
HUE PHASE [0] to 359 For specifying the hue center position of which edge
enhancement is to be performed.
HUE WIDTH – 99 to [0] to 99 For specifying the hue range of which edge enhancement is
to be performed.
SAT WIDTH – 99 to
[0]
to 99 For specifying the saturation range of which edge
enhancement is to be performed.
FREQUENCY L/
[M]
/MH/H For specifying the center frequency of edge enhancement
signals.
RANGE 1 to
[2]
to 3 For specifying the variability of edge enhancement level.
Page Menu Item Settings
(default in
[ ]
)
Function